Search results

No its a tiled floor above (main bathroom) If necessary I can rip out more of the ceiling but trying to avoid if I can, The ceiling was double skinned by previous owners, I have taken down one layer of plaster board. and will replace the one I have taken down when electrics are done. It is...

I should have added ground floor so no access to the loft, currently working in the void via the holes left from the Halogens. The current cable in the void is 2-core plus earth wire, so if reading your reply correctly, I use the current 2-core + earth to the ceiling light and a 3-core + earth...

I have just taken out 3 of the 4 halogen ceiling lights in a bathroom. My intention is to replace with a central ceiling rose and LED lamps, plus, add in an extractor fan. The surviving halogen has wherever the feed comes from via the light switch. Questions: Once I disconnect the final halogen...

Thanks Tony I eventually found it. thanks

I know it is an old thread but how do you get part 424 off as I have a similar problem and it may need replacing. thanks

Baxi Combi 100HE plus. Hot tap water but no heating. Checked water pressure etc and pump appears to be running when hot tap is run. I suspect the actuator valve is faulty it is a Honeywell VC4012 actuator. How can I confirm this, and is it an easy DIY fix. The part is readily available on ebay.

PIRs were advertised as suitable for LEDs. I have tested indoor and all works ok.

The cable run from the PIR to the mains connection is just a tad over 2 metres.

Thanks mikeyd, I wasnt quite sure what wire would be best I do have some 2-core & earth 6242H 1.5mm but dont think that would be suitable so looking more at a 3 core and using sleeve or tape to mark the live feed. Advice on cable would be good. My intention is to feed this from a 5amp socket...

Yes there is, I am just testing this indoors at the moment to see all will work ok before I get to install outdoors. I just want to make sure I have the layout correct and then I need to order some cabling and whatever else I need.

"What are A, N & L on the PIR? Where are those conductors supposed to go or come from?" A=switched live, n= neutral, l=Live. Earth screwed to flood casing which is the righthand image.

No earth on the PIR, only on the floodlamp.

Could someone confirm this wiring to be correct (or otherwise) It is for a mains fed LED floodlamp with separate PIR. I am not sure how to get an image on here but hopefully at the link below: http://www.diynot.com/network/juco/albums/ [/img]

I have dismantled the shed and rebuilding & resiting it. I have to replace a few planks (tongue & groove shiplap) and a couple of the uprights (wood rot) as the previous owners let it sink into the ground at one corner. A couple of questions. 1. The old wood has had various...

Thanks for replies, Never thought of that they are UPVC doors but will have aluminium frames concealed behind the UPVC

Can someone guide where I could buy the hinges as pictured below. Google throws different versions. The internal cam must be worn as they are not adjusting.

When you view click on pause and let the red bar progress a bit before viewing, could be lack of memory.

One can only try, in a situation like this, there wont be a stock answer. But you sound imaginative enough that you should find a solution. the problem is no one will notice it but every time you look at that wall you will cringe :-)

OK, thanks again for your replies and halp. scudo

Many thanks for that I will order tonight. Just a thought although I wont bother now as the part is in stock and should receive early next week, but if when I discovered it was worn splines on the pulley and the fact the machine was still working anyway although noisy, would a couple of thin...