Search results

You can't tell the exact value without a caacitance meter or bridge. Capacitors are cheap enough in Maplin. See here http://www.maplin.co.uk/Search.aspx?criteria=motor%20capacitor&source=15&SD=Y

As I said earlier. Try www.fordmondeo.org They are a great bunch of guys and really ready to help out. That's what Mondeo Enthusiasts are about. Bernard

Just noticed the year 98. Mine was 96 (Mk1) so probably different. Sorry for putting you off track. Excellent site for this type of problem is the Mondeo Forum on www.fordmondeo.org

There's a rubber "T" piece in the vacuum line. This is located under the ignition coil. Check that, it's a common fault. A replacement is around £4 from Fords.

Can the flow switch be purchased anywhere without having to buy the brass "T" section ? It seems such a waste of materials and money to simply use the switch and dump all that brass. Worcester Heatslave Combi (oil) 20/25

I changed the diaphragm on my boiler a few weeks ago. Simple job but not much room to work when refitting pipework. Takes around 1/2 hour. Diaphragm was around £8 delivered. Got it here http://www.mjtcontrols.co.uk/Appliance_Type3.aspx?Manufacture_ID=56&Appliance_Type=Gas+Boiler

In a reply from Ryobi the EMS2026SCC and the EMS2026SCL are one and the same. Apparently Screwfix alter the info in their catalogue for promotional purposes. I just bough the "SCC" from Screwfix and received the "SCL"

Hmmmmmmmmmmm, you are right on that. What is the most reliable Dusk to Dawn switch ? I would prefer to pay that bit extra rather than fit junk.

I need to fit a path light which comes on at dusk and off around 4 hours later. Anything reliable on the market suitable for this ?? The lamp will be a low energy 15 or 20 watt.

I need to hang a pair of gate hinges onto concrete block wall. The original fixings were screws direct into the concrete (no plugs),and not very secure after only a year's use. It is a small (ish) gate but quite heavy. I was thinking of using 10mm x 70mm Stainless Coach Screws into plastic...

One pass is fine. A perpendicular pass will break up the lawn too much Take care at the end of a run ..... stop the machine and place it i n position for the next run before starting. If you try to turn around with the machine running you will churn up a load of lawn.

This time of year RADS for me every time. You can turn on RAD heating for 1/2 hour and get results, not so with Under Floor Heating. Underfloor heating in a cold house can take a day to give you the results you need. Pain in the bum as far as I am concerned.

Just been looking at the Mac Allister saw in B & Q. 1800W - 250mm blade - slide saw. Three years warranty. It looks quite a robust machine. Any reviews ??? It is only for general domestic use.

JUst had BG to look at gas combi for service quote. Only fault found was the filling loop consisted of a fixed Gate Valve (fitted a month ago by a CORGI registered plumber). To remove the Gate Valve a fit a proper filling loop BG's quote was £230 :shock: Considering the loop complete...

GORGIS best left to the Queen.

Also Danfoss SET 1E

Brilliant service. Thanks.

I am looking for an external timeswitch for my Biasi 28S boiler, mainly because the Biasi switch seems to create more problems than it's worth. As far as I can see from the circuit it would need a timeswitch with "floating" contacts. All the timers I have seen so far have the time contact...

Are you sharing a supply with your neighbour ? I live in a detached house and both myself and neighbour are on the same stopcock !!

Removing the old lock is easy but cannot be posted for security reasons. New euro cylinder around £7 and with fitting and removing the old lock I think £30 would be a fair price. Crooks would charge £180