Search results

we have had all the pipework replaced as well as the boiler, all the old copper was taken out and replaced with plastic, but we just left the rads in place, but there is no heat in the rad at all thanks for the reply Flameport

Hiya guys. Does the sludge build up in a radiator stop it getting hot? One of our radiators does not get hot, we had new pipework, valves and a new boiler fitted this summer, but we didnt replace the radiators, we have not really used the system yet, all the radiators are balanced and bled, the...

blocked jets in the carburettor?

i think i am going to be stuffed on this one, the wall is brick at the rear of the bath... i think the bath will have to come out, i cant see how my plumber is going to get a spanner under the tap, and i have been told that the brackets for the bath will probably be behind the tiles, so it will...

like it, thinking out of the box there mate..lol

Hiya guys... Our bath taps have started to move a lot when we turn on the taps, so i took the bath panel off to have a look, and i dont have a clue how to get to tighten the locking nut under the tap, or even how to get to it, they are in the centre of the bath up against a wall, and they are...

aaaah....brilliant, well done. Thanks a lot

Thank Burnerman, but i cant see the part listed..

Hiya Guys, where can i buy this from? Its the bottom round part, the one that the shower hose connects to, Its a triton mixer shower, but i have no idea of the part number or where to get it, its made of plastic and cracked on the inside resulting in water running down the walls tiles Thanks Guys..

Good luck living with the neighbour after this, i feel your pain

ten ten over

well, i thought you would be able to give the op a clue as to what you would charge, i thought you may be able to work out that if everything was in place, nothing was a problem, nothing much needed changing, nothing needed power flushing, bish bash bosh...it could be x amount of money, but if...

somehow i didnt think you would... as for your open question, i dont have a clue

couldt you have a guess, give the op a ball park figure? did you ask me a question?

so how much would you charge the op to fit the boiler?

i very much doubt it will be a straight swap, like for like

not really, it was all done in the airing cupboard, obviously he did have to change the pipework a little to match up with the new boiler....oh, we had a new wireless thermostat as well, which are about £100

we have just had a Vaillant eco tec pro fitted, i think it is the 32 size, not sure if that 32l or 32kw, but its 32 something...anyway, we paid £1860 fitted with the inhibitor and magnaclean. i was told it would have been a couple of hundred quid cheaper if the flue went through the wall, but he...

this is what you need.... https://www.screwfix.com/p/titan-ttb278sds-6-3kg-corded-sds-plus-drill-230-240v/97533 cheap as chips and will go through anything, heavy and powerfull

spot on mate...