Search results

Had someone round to look earlier and it seems it was something on the PCB that had blown so the pump wasnt working, hes temporarily bypassed this so the pump is on constantly so we have hot water and heating... and no banging and clanking. Coming back to fit the PCB tomorrow if he can source...

Not sure i'm confident enough to remove the front plate.

Have just taken my son up to bed and the upstairs rads are all warm..... down stairs are all cold.... have left boiler on cycling through the power up down all afternoon early evening and there was enough hot water to have a shower as well......

Hope this is OK..

This is the top of the baxi... No vent?

The tank filled fine. I tied the ballcock during cleaning .. Do you mean this drum (circled top left) as that was where I thought I heard the first banging coming from?

Yes bungs removed, i removed the rad by closing off valves (capping off both sides as well just to be sure) and left valves closed, also part drained a downstairs rad to create space for the inhibitor - opening bleed vale and inlet after to fill with water)

this?

Googled manual air vents and went for a look, couldn't see anything ..

Not sure what i'd be looking for to be honest, i had a look up in the loft at the expansion tank and it was full of murky water... i cleaned it out yesterday using a couple of bungs when adding the inhibitor

Ignore the ticking that's a clock...

Removed a radiator yesterday and added a boy of inhibitor while I was at it and everything was fine working fine last night and heating how water were working this morning.. Popped to the shops came home and put the heating on, heard a bit of banging and clanking which sounded like it was...

Anyone know why this pipe has been compressed/crimped? Never noticed it before as its had a radiator cover on? I'm planning on draining system tomorrow so could possibly take it out and replace with some push fit... Sorry about the cobwebs...

I'm looking to replace radiator in our bathroom, the system hasnt been flushed in years. Am i ok to fit a new rad and stick in some X100 in (3 bed with 9 rads) and hold off using some x400 until i've finished decorating (in a few weeks) or should i remove rad stick the x400 in now and give it a...

Yes, but completely decorating bathroom. Thought I'd was to tile underneath a toilet before fitting it (once I've made sure I have correct fittings to connect to the pipe

Going to tile the floor will have another go tomorrow to try and remove the lip, had a poke around and can definitely trim away a bit more to reduce the diameter. But hoping it's low enough down now to be able to run the bath/shower waste in .. That's the current bath waste you can see in the...

Just to update.. TBC

Great thanks for the help, much appreciated....

What sort of disc do you recommend using on the grinder? Sorry no idea what flaunched to the extb means?

Its a swept bend off to the left, approx 40mm that side.