Search results

How you taking pictures? If you use a phone or tablet turn the screen rotation lock off. Other way is to open photo in a gallery. Rotate so it's wrong and save then rotate back so it's correct and save again. That will add or correct the EXIF data...Exchangeable Image File Format

All good here. I can't replicate. Check screen rotation isn't locked on

They display the correct way around on iPad gallery? Have you locked the screen rotation on iPad or phone? That may mess it up as well. If you want you can randomly DM some photos to test to see if you can work out what's going on. Wasn't the server swapped here recently? Or maybe a server...

If it's definitely not on the door edge then it's behind glass.

Don't box things in. Create an access panel. I've had to punch through bedroom walls or pull down ceilings to gain access to these modern lovely looking bathrooms. Right problem

Have you reached out to building control? That's where I'd go first. Used to be able to phone them but they switched to email or letter now. Then see what the neighbours say and go from there..

When I paint stairs with old gloss or bare wood I would warm some BIN spray cans and spray spindles. 3 is normally enough then brush and roll the rest. Would take about 10 minutes to get a coat on spindles with spray cans so a huge time saver and easy job. BIN has poor opacity but don't worry...

Stuck things like that like nuts or whatever. Take up slack and smack wrench. The shock will break the then grip and will unscrew. That's all I can suggest

Short syphons are the norm now replacing taller syphons. This gives you a built in overflow. Is this what is happening with your toilet? It's overfilling and overflowing into pan

Swap syphon for one with onerflow built in. Any excess water goes down the pan then you blank off the overflow hole on cistern

You don't have any options.. You need to escalate. Basically. Start off sensible and tap it a few times. If that don't work start swinging. If that don't work start swinging and follow through

Wooden mallet or rubber mallet. Smack it off

Don't paint the wall if there is paste residue on Wet the wall and if it goes sticking there is paste. Coat with Gardz first

Wet the wall to see if there is any paste. I've never been able to wash it off. In the early days before sanders paste was a problem at times. Maybe gardz and paint then if it's good. You could risk just emulsion if you want but any paste could react

Cut wood to shape and stick 120grade sandpaper on with wood glue and sand. Toupret powder filler is the best stuff imo

Here you go.

Buy a cheap multi meter and test power to sounder I guess. That's where i would start

I wonder if it's not sitting flush. On a curved surface? I don't like that sort tbh. Normally works fine though

Washing machines don't require a hot now because of lower temperature washes. You really need to cap that hot off, don't leave it open like that! You can buy a cap that screws on so easy job. As for blue and red being different positions it's because someone fitted it that way. It's because the...

Pop the red cap and find screw inside or Allen key/screw around the back through hole. Those taps will be a quarter turn ceramic so you will have to order the correct one online. Unlikely to find one local as so many sorts. Masking tape around handle, then with a wooden hammer, smack it off...