Search results

Does any1 know where i can buy a megger wanderind lead for a BM121 model?

Will these do holes in bricks? Its just been told most will only do soft blocks and the bricks break the attachments, is that true?

Dont see how hammer and chiesel will fit into hammer stop drill!

Can any1 recommend a attachment for SDS hammer stop drill which will put socket/switch box holes in walls made from brick? Theres a few out there but want someone to recommend a decent one which will do job and last a while

Does pond pump switch have to be rcd protected from inside house? Or can it be rcdprotected in WP RCD just below it outside? In other words does SWA have to be RCd protected or can it be terminated into an WP RCD that supplies load?

Link should work now

But you can gland stright onto the plastic pond pump though yeah? Its just from what ive read on hear before you always have to gland to galv box 1st but obviously this would be dangerous when outside

What about glanding to a pond pump http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=A340303&ts=04451&id=95422 How come you can to masterseal?

Is it ok to connect a SWA gland straight onto a plastic WP Light Sw? I know you normally have to connect into galv box then take cables from this to whereva they need to go, but a galv box is not WP and would be dangerous outside in wet weather. Any suggestion swelcome

You need an IR test, this will determind if there's a fault bewteen conductors so you'll need to cal a sparky

How did you guess? Loadsa questions i suppose

Or is running in plastic conduit and using T&E the only option apart from SWA?

Why do some dimmers say dont need derating and some do? Just looked on few sites thats all

Is that where it has to be lower than 0.05ohms? WHat if theres broken continuity ie plastic pushfits?

What if there's fixed appliances etc would you just IR btween Lives and Earth, with both lives together

What if people dont want you ripping bath panels of baths to check bonding cos adding spots in lounge? Do you refuse to do work?

So is it dangerous or will it just burn dimmer out?

Normally around 100mm

Didn't know you had to derate them. How come?

Yeah halogen, how did you know?