Search results

I've had random tripping on two occasions over the years One ,some 20 years ago was cured by tightening an earth post screw on a metal ceiling lamp.This only tripped when there was heavy pedestrian traffic above. The other more recently was cured by moving an (aledgedly)IP junction box from a...

Thanks ,yes it goes though a 90 degree box reducing the 2800rpm down to around 40. Sorry to be thick but any clue from the picture there are ferrules marked I'm taking one wire from each pair? Am I making this more complicated than it is...

Got it wired this morning on a temporary 4m length of 1.0mm flex. It ran for a second then tripped a 16a breaker Fuse in the plug was intact so tried again and it runs really well,cycling the socket switch on and off with no probs I suspect the capacitors needed energising. Aside getting a...

:LOL:Yes ,don't fancy being chased around the site. I'll try it out and report back next week Thanks for the assistance

Thanks for the swift reply,I know I should have start/run,I was hoping to get by by only starting on an empty drum..... I'm guessing this will make the local power station grunt when I hit the button. If it's running in the wrong direction,I just change the wires round on the U terminals?

Sorry chaps ,just getting the hang of the image editor. I need to know how to wire this . It's a potential replacement candidate for a cement mixer. I just want to see if it works before investing time and money in it. The box has four terminals, diagonally numbered U1and U2 then 3 and four...

omfg