Search results

I'm just looking online now for the csa cable ... I had a quick look inside the cu after I took the pick at they do the separate neutral ect so they are protected by the mcb the cable feeding the neon is 1.5mm cable

Could I put in a 3a inline fuse to protect it?

I can change the mcb if required to but at the moment it fine

Do you mean the "main power in" neon

What I can see it uses one of these Piranha Earth Locking Nuts at each end http://www.tlc-direct.co.uk/Images/Products/size_3/PRPEN20X.JPG

It comes in via the top of the shed then goes into a metal box what again it used the swa armor as a earth the the live and netural go straight in the isolator switch in pic one... Then into the cu rcd The earth comes from the metal box and then into the earth point in the cu

Go it compleatly wrong well spotted :/ the earth cable from metal box what comes from the swa cable it is connected to the t+e earth what the goes back to the main cu

Thanks. So this is at the shed end: What I can work out is that the 4 neons what you can see in picture one and the last one, so if you turn off or the mcb trips it turns the neon off I'm not sure why it been added for who knows ? Any suggestions? Also there is another...

Can I as why it confusing for ? Or was it the way I put it across?sorry for the whys

Ok so just moved in our house today and notice this: 40mcb in main cu to 10mm twin and Earth then it leads to a double pole 100amp isolator switch (in seperate housing about 1m away ) the next to that there is a metal box what the 6mm cable in from the shed. In the metal box the swa cable...