Search results

yep the bottom bit where the plug goes into isn't central so need to sort that 2mro. the leak was coming from the bath. all the sealant was knackered. I sorted the waste thing with a flex coupler from b&q . its a grey rubber thing and fits from 38mm to 50 mm. it has an adjustable ring...

hi What is the best way to cut a tile for a thermostatic shower? Should i just cut the tile in half then nip out the section for the pipe ? or os there another way? Many thanks

/////////

Can you tile straight onto plasterboard?

Ok sorted the leak but the plug won't go in all the way its asif the whole mechanism is slightly off?

its ok. no rubber ring. the mech works fine but it doesn't seem to take the plug all the way down? You know the silver lid, that covers the plughole, its on a hinge, where the high fits are 2 holes that go all the way through the plughole ring? if that makes sense?

should there be a rubber ring for the plug. Not the 2 big ones that already fit underneath, and the bit that the hinge fits into has holes all the way through, is that normal?

right then I've taken everything off and all the silicone knackered. You reckon new sealant and some plumbers mait?

managed to get it of with a big chisel, it was the right size to unscrew it, All the rubber silicone is knackered though.

how do you get the trap off?

oh and now the traps leaking

right managed to do it using a rubber coupler with a collar on either end but now the flipping plug won't work? it won't go down all the way any ideas?

Ok I've managed to solve my other problem but now the magnetic plug won't work? Its the ideal standard waste system and the plug works on a cable. anyone got any ideas?

tried it as tight as poss, still comes off?

tried a 40mm its still loose?

Thanks for this, The hole was already done so I didn't have to worry about that, right then I need to fine a Mcapline fitting. here goes..

ok, will try that 2mro. after a visit to B&Q. Fingers crossed it will work, thanks for your help. I will let you know how I get on

its page 8 on the pdf fig 6b http://www.ideal-standard.co.uk/InstallationInstructions/4719%20Concept%20Rectangular%20Baths.pdf

yep thats the bit!! what size did you use? and whats the collar all about?

the only seals are the 2 you can see, everything else is solid plastic! A 40mm pipe doesn't fit through the back end of the 50mm but does fit into the other end (the ned that clips on) If you put a 40 agents the outlet it just butts up. I just can't see what it needs?