Search results

That's just it I didn't I switched boiler off at mains,and open the valve at the lowest point and bled system

When I put water pressure to 1 bar on boiler it won’t go down straight away. The pressure does not go up it stays around 1 bar has the boiler warms up it starts to drip through elbow outside. If I turn off the boiler and pressure it. It seems to last a lot longer I have got the loop. Valve closed

The outlet with the elbow on is dripping

Or does the vessel need re pumping up it’s a Vaillant Combi boiler

I dropped my system to change 2 radiators I closed the valve and closed all the rads filled up the system to just over 1 bar open the bleed and filled up all the rads. I started the boiler up at just over 1 bar no leaks but my outside drain for boiler is dripping. And losing pressure could this...

I followed what people explained how to wire it up it still won’t work

And the neutrals put them all in same connector block too. so your left with 1 red is the switch live. That’s goes to the live on the light fitting The 3 cables red and 2 brown join them all together in a single block and the neutrals do I put both cables together in a connection block and...

So you saying the 2 browns and the red cable I should connect them all together ? In one connector block?

Yes there is

I have enclosed a photo do I join the 2 red wires together to my live fitting on my light fitting as I assume they are live live switch just a bit unsure