Search results

thanks for your reply i will try 1 bottle thanks for your help

I need to know how much x400 to put in first

Hi everbody I have got to remove sludge from my heating system,but i don't know water the system holds.Has any got any idea how to work out how much water a system holds. many thanks

Thanks for your reply. It works ok but my concern is what to do if it gets blocked, after laying a new floor, as there are no openings for roding.And the stack is on the opposite side of the house

Hi every body I have a 1960s detached house.It has an extension to one side, and the floor is concrete aprox 4"below the house floor. In this extension is a shower room with a toilet & macerator. On lifting the ceramic tiles i have found a channel containing the drainage pipes covered with...

Hi everbody I have a potterton prima boiler running hot water & heating.when running im getting vibration from the three port valve which goes round the pipe work and its driving her indoors up the wall.Can anybody out there help a man achive a quite life. Thank you from a man with sore ears.

Hi thanks for your reply.i've checked the tank it has a light covering of brown stuff in the bottom is this sludge,or something else. my neibour is telling me its not the pump thats noisy its the three port valve is this possible as it only has water going though it.thank you

Hi everbody I have a potterton prima boiler it runs hot water and central heating. My problem is when its been running cental heating,it gets air in the system but i cannot find any leaks. If left to stand say overnight when it starts you can hear the pump straining.someone suggested sludge...

Thank for your reply.Its a potterton prima 80f boiler, the system has a 3port mid posion valve.hope this helps.thank you

Hi can anybody HELP. I have a problem with air getting into my system,but cannot find any leaks.It got so bad yesterday the boiler cutout cannot find any leaks.it got so bad yesterday the boiler cut out. It seems to be worse when the kids have a bath ,or the heating is on. any ideas would be...

Thanks for the reply.But the vibration is not as bad when hot water is on by itself,but much louder when both are on.Most of the vibration comes from the 22mm pipe feeding the rads.Its anoying vibration with a loud hum.

Hi hope someone can help my water & heating, are run by a potterton 80f boiler. The pipes from the boiler are 28mm to the pump, 28mm from the pump to a tee,which is 28mm at the top 22mm going to a 3 port valve & 15mm to the bath rad.After the valve there is a lot of vibration, it sounds as...

Having looked at the pipe run, i canot see a way to open it except where the pipe enters the macerator.The only other way would be to cut the pipe NOT a pleasent thought at lunch time.

It goes on until it hits the stack.You can hear it as it goes down the run.The pipe run has 4 92.5 bends in it could this be the problem

sorry about the spelling .The gurgling come from the pipe work, after the macerator has finished pumping

i have a saniflo macerator, when the toilet is flushed iget gurgaling from the pipes. Ihave measured the run its 10 meters long ,and falls 250mm.the pipe work is 32mm. Can any one help.