Search results

Clearly you are as daft as you had been made out to be. If you were that clever why did you post on an internet forum and then why did you have to call a gas engineer. Dafty.

Nothing to do with gas- hope you know what your doing? Otherwise fga will be well out. Most likely blocked low water pressure switch, or melted aps

3 jobs all in same development-leaking.

Had a few breakdown jobs on these. Mostly leaks- make sure you service it regularly to keep on top of the leaks.

I would save time and copper and just have a common return, if you did get call backs for reverse return then you could just put a non return valve on the effected but of pipe. Other people might think different?!?

Personally I would just use a common return, and would Defoe fit a bypass - Even if no pump over run would still fit one- saves any call backs for noise when two Ports closing.

Thanks, I sorted the 1st one today, just rewired it. The fault had been some muppet had put a N into a HW off at timeclock.

kool cheers for ur help! How can u check for breaks in cable if that fails? Thats outwith my electric knowledge!( i think)

yea 3 cables at timeclock, on live and neutral and 2 switch lives with one heating off, its kool i will just disconnect everything and work out exactly what every wire is and reconnect it! cheers anyway. whilst u are giving advice - heres another wierd sparky job i have had this week...

I cant be sure, although at junction box all blues are in the same connector and this is where i am getting the reverse polarity Timeclock all i have is 3 reds 3 blacks 3 earths, Il end up ripping it all out and rewiring just curious to what is happening as i dont like admitting defeat!

Sparky help required, I have an electrical fault with a heating system. Basically its an old back boiler system: one 2 channel timeclock one room stat one zone valve one pump and ofcourse boiler. This fault has occured after another engineer has attempted to replace the...

Thanks, I am getting another couple of virgin boxes in other rooms in my house and want to use sky cables i have already in place! Another quick Q. Is there any other method in connecting the connecters onto the cable without using wire crimps! (as it is one tool i dont have!)

Are you able to use sky coax cable to carry virgin signals?

1st thing you need to do is make sure you have the correct flow rate @ your tap, ie roughly 9/10 litres of water per min.

Trying to get my building warrant for my extension and the guy is saying that my roof reqs a high level roof vent, I have two seperate pitches of roof on which has the greater pitched roof has two roof vents. My smaller pitched roof doesnt have one. I have been reading on vent...

You need a gas safe eng to check the boilers flame rectification operation, ie boiler aint sensing that there is a flame and it is goin out!

Ravenheap csi 85 band A? does this only do it on CH? ie does burner stay alite when you run a tap? if so its your fan modulation pcb

You have a fault with your air /gas mix, more than likely something wrong with your flue(if noise only occurs with case on) do you have a long or short flue? vertical or staight out? You are highly recommend not to use ur boiler with the case off!! - do so at ur own risk

remember and fill out the benchmark book and reg boiler so you can get gareentee