Search results

DIY

Thank you r896neo.

Hi All, I'm in the process of digging out a 7.5m x 4.3m (32m2) plot to stand a concrete base for a summerhouse, the overall depth of the plot varies slightly from 150-250mm from where the garden slops in both directions My plans are to make use of the piles of general hardcore and rubble i...

I did, nothing :) sits at waiting connect or when com1 and onboard are both set to comm2400, it sits at * waiting for pc *

thanks Alarm Still having a few issues getting this dialing, suspecting it could be a faulty module texe support have asked me to remove the comms cable as i have a 10 pin connection to the digimodem its possible the premier 24 has variants as i understood the comms cable was required on...

Oldish thread but did you resolve this issue? Currently have the same thanks.

Update Aux tamper was already looped out, thats not the issue fitted a 2k2 across one of the redundant zones and the panel reported as "secure" so i assume this is what is needed in addition to set as "not used"

Hi Guys, just wired in a Texecom Premier 24 panel with no expansion cards so just the 8 zones made up from 3 PIRs and 2 Contacts i have used EOL on all the wiring Zone 1 on the keypad is mapped to Zone 1 on the panel the remaining 3 panel zones are set to "not used" as detailed on page...

thats it!! oh well no biggie, i'll just have to send the missus downstairs to turn it off 8) thanks for all your help

im with you, RF mite be best, so still i have to go downstairs to my hallway to make any adjustments right? i cant use an additional 81 to override from upstairs

No just single zone i dont mind it been single just wanted upstairs / downstairs control of the on / off / temp is there a better way to do it?

Yes will be using the WC outside sensor, i agree it is pointless as its a thermostat aswell, but im still left with no way of controlling the single zone heating system from both upstairs and downstairs with only having one box i take it if i use both the 430 and the 81 as thermostats then one...

the idea of having both the 430 and the 81 is that the 81 will talk to the 430 via wireless, so i thought 430 downstairs, 81 upstairs, no its only one heating zone but we would like to increase the heat without going downstairs

Bump :)

Hi Guys, Hope one of you gurus with extended knowledge on heating systems can clear something up for me Just had a Valliant Ecotect Plus 831 installed with the standard TimeSwitch 130 thats the 24h analog timer which we tend to leave on timer 7pm - 11pm for the central heating, all rads...