Search results

I always fit filters on new systems and advise on older systems, it down to the customer if they want to go ahead , I give them a price and leave it as that Lot of customers think it’s a good idea when they see them working

If you don’t want to cross you can cut them add a coupler and bit more pipe to fit Paul

Magnaclean pro2 for me

Thank you much appreciated you posting, think we will knock conservatory done and make the room separate less hassle Thanks

Yes understood that but would it be possible to build onto the extension. Could I get enough of the roof pitched to join into it

Hello We want to join on to the extension We want to knock down the conservatory and make one big extension. Question would this be possible Both extend out by 4 meters Thanks

Yes light was fitted a while ago on a plug into socket in garage , got sparky round to ride up wiring as a lot of fuse spurs taken of sockets. Now light goes into double pole switch then wired back to cu

Thank you for reply when I turned off garage cu the problem still exist Thanks

Have tested every socket with a tester all ok Lights are on 2 circuits up and down stairs Thanks

Sorry meant rcd , kettle doesn’t trip with up stairs ring or in kitchen. Have unplugged everything and removed fuses from fuse spur but still trips . Thanks for posts

Hello We seem to have delevloped a fault in the down stairs ring. We can use the tv, hair dryer standing lights sky but soon as we plug in say kettle , lawn mower it will trip. We had a out side light wired up through the garage consumer unit all work done by a qualified sparky and also a 3...

If pink pressure sensor then I would replace plus pump up expansion vessels

New pcb will sort it out

Fitted loads of energy boiler with no issues, it’s not the boiler it’s how it’s fitted and how good the system has been cleaned Paul

Can’t beleive you don’t have a phone number for the installer. How did you contact him ?????

Could it have gone up through roof using a vertical flue

Prob been sticking soaking wet towels on them

Yes can be tested

Faulty 2 port or 3 port valve or faulty cylinder stat

I replace them every 3 years that way you can give a good clean inside heat exchanger