Search results

The p1keys may have been at work removing the lv neutral/earthing...

Done that before (well my sisters ex had the hammer), made a dink in the pipe but that was it!

Well put it this way, my mums house has a reasonably modern mem memera 2000 board with RCD protected circuits. I still managed to get a good shock from that before it tripped. Singed my fingertip too! ...hey ho :shock:

I had it once where we had a fault to repair in a close and half of the houses would have to go off to make repairs. Anyway, we went door knocking to tell people they are going off and one lady- as soon as we mentioned sse she just said 'nope I'm British gas, I pay them so my electric will stay...

I'd still of given it a birthday if i'd come and looked at it but thats just me 8)

Chances are the bang wouldn't blow the s/s fuse, it would just arc away until the live burns away from the neutral. Don't touch it.

You know those fireworks you get that go up into the air and go off with a bright flash and a very loud bang? Well imagine that in the house and that's what you are risking happening.

Is that all? I did a job and a bit of 4mm was going into an illuminated sign column, with two loops coming off, one feeding a kiosk. fed from the kiosk was 15ish streetlights (the tall ones) going off down the road quite far and off down the other way too. And a set of traffic lights too!

I'm on standby New Year's Day :(

The earth connection is directly onto the armours of the cable not on the lead sheath. Pretty rubbish IMHO.

I have a 3x50w GU10 halogen light fitting in the lounge which has a dimmer switch fitted to switch it. Now for the second time the dimmer switch has failed- has no effect, lights won't turn off and the knob goes all loose. I.e it is kacked up inside! What is causing this? the light fitting...

He wants a kick up the arse!

Got called here today, the meter was smoking apparently. Turns out that it they'd had the place re-wired/consumer unit change a few months ago. What was smoking was an ancient ELCB between the meter and the CU. I have serious doubts about the spark who did work here, The main earth is only about...

That fusebox, or something near it looks to have had a moment! Seems warped at the top and the area is blackened :D

Exactly, if all is well then leave it be

It won't actually be PME as the cable will be a two core paper insulated lead type which is what we call SNE (seperate neutral earth) and the system is designed in such a way that the lead provides the earth and is earthed at the substation and the neutral conductor is just that, neutral. On...

That's rough as a badgers ass! I can see he's just bonded the earth to the neutral to make a rudimentary PME system. This will work but is not proper, if he was going to go down the route of providing you with an earth then he should of gone and dug up the service as it joins to the main and re...

The dno are only obliged to supply a live and neutral, if the earth is there and tests good then we put an earth clip on the lead and a block for the customer to use, if is tests bad then we shrink heat shrink down on the sheath so it can't be used as its no good anyway. They should of tested it...

Is this against the regs? Basically can you have one post with a water tap installed half way up and a 4 way electric hook up box installed at the top? Ie water and electric on the same post.

Yeah seen them before, it just seems to have like a spring loaded terminal that puts pressure on the core to hold it in place. Don't like the look of them tbh