Search results

We decided to cover our concrete slab side walkway with some reclaimed riven buff patio slab. I know these slab usually directly on compacted soil but on my case it would go on solid 100mm concrete slab. I guess sand and cement would be fine to lay them. I know it may sound stupid but would I...

Issue was on the diaphragm which slipped from the needle valve and was putting pressure without pulling it and basically was flooding the carb. Start fine now. For a fine tuning I currently set up H and L at 1 1/4 but seems still not the best set up as no fast response when accelerating but...

Strange thing is that I have replaced the diaphragm and other bits but keeps flooding. Is there anything else I can check on carburetor? We don't know the reason of the sale but I saw loads of them maybe coming from some contractor that have renewed machines. Who know. Seems I good condition...

John, Cleaned up decompression valve. What I see here the carburetor keeps filling of fuel even if not trying to cranck. Removed all fuel. Cranked upside down few time. Tried to start and it started at second pull for few second as no fuel on the tank. What's the issue. Carburetor related?

Got from an auction a Disc cutter k650 to keep as spare in case some stihl need service. It started at first pull and idling very well but not accelerating. I cleaned up carburetor and put new gasket and diaphragm. It started again at first full and seemed to accelerate very well than stopped...

Can I trust the joint and attach a barrier pipe to the copper without going from the lead with moder coupler.

Common?

Can I use barrier pipe for underground?

Would you use barrier pipe or MDPE for underground pipe as was thinking to extend further and adding second tap which need to go under the garden grass. Money wise I would prefer just to buy a single longer roll and use for both Thanks

Is there any other option to move from lead to barrier pipe directly without going from lead to copper using the https://www.screwfix.com/p/flomasta-compression-reducing-lead-to-copper-coupler-7lb-1-x-15mm/53125 Thanks

Sorry, I forgot to update you guys. Mate ordered the primer bulb and I replaced it. Not even replaced the gasket as I wanted to have a gradually go without taking carb apart again. Got him to cut grass once again and got him to stop and start mower several time while hot. Seem working fine. The...

Got an External tap connected to lead pipe and copper just pushed in not even welded or sealed. Not sure how this was not leaking. Now need it to be moved to another location 10m further the garden. Was thinking to use lead copper adaptor and then use barrier pipe. Can anyone advise if the...

What thickness to use for the carburettor gasket? Primer bulb with or or No Hole. Most after marked have with no Hole and OEM has the hole but does not state on which carburettor model goes. The primer bulb fitted has no hole but no sure if they fitted wrong one in the past ;)

I cleaned it up twice. I guess is clean :D Will get mate to order primer and will make few gasket from sheet Will let you know if improves.

So ideally would be to replace the 2 carburetor gasket and primer bulb correct?

Nothing with one push on the primer but but with 5 push and 4 or 5 pull the engine start again. What's the issue there?

Do you mean the push on the carb.

Mot done recently and they did not pick up any issue