Search results

Check that you have wired correctlyhttp://www.wppltd.demon.co.uk/WPP/Wiring/UK_telephone/uk_telephone.html

Make a saw horse same height as workmate clamp the wood and saw away.

With phone lines that go noisey due to a poor connection if you test them which sends a voltage down the line it can temporaly fix the fault bt use to use blue crimps which are bad for this the new type are ok .So its back to bt and when the man turns up say the new pair did not fix it and he...

I have edited this post as its solved.

This may help as mentioned above its number to number http://www.wppltd.demon.co.uk/WPP/Wiring/UK_telephone/uk_telephone.html The third wire is the anti tinkle wire that stops bell tinkling on old type phones.

If you run the jigsaw base along a batten clamped to the job you will get a smooth straight line new blade fine teeth.

1.767375sq mts its pi( r squared ) r is .75mtrs pi is 3.142 just ask google.

You are moveing it for a better look but the twin incoming cable is to short it can be extended via a suitable jcn. box internal or external, use telephone extension cable its thinner but its ok make sure you get the wires the correct way round or it wont work.

If i am correct the cable is fused at 20a my suggestion is a 16a dedicated saw cct and a 10a small tools etc therefor if operator error caused the current to rise above 20a the mcb in the house will trip you are covered for any overload situation and only the saw can use the higher rated feed.

I have a sip table saw 3hp it runs fine on a dedicated cct on the garage distribution but it use to blow 13a fuses eventually on the ring.So would it be possible to have a seperate cct for the saw with a mcb able to handle the start up current.You could have a 16a industrial plug & socket so no...