Search results

Cheers, thanks for the advice.

Motar is about 2 years old when valley was redone

Hi All I have to remove an old boiler flue from roof. It is right at the ridge and the other side of ridge is a valley as shown in the attached image. What is the best way to remove the two ridge tiles. Angle grinder and chisel away at cement? Also both ridge tiles are sitting on the top of...

Wiring for new thermostat.

HI All, I would like to join some flex cable to twin and earth in the airing cupboard. Can anyone explain the best way of doing this. I was thinking of using wago's and the grey wago box but i don't think that box would be suitable in an airing cupboard. Thanks all.

Thanks much appreciated

Is it OK to route the boiler prv pipe underneath the dpc course if necessary? Thanks all.

Thanks kidgreen61, do you know what they did so that no mod is required? Do you fit them?

I couldn't get an answer from ideal on the latest manufactured ones. I just wanted to know if they just fitted the upgrade kit to these to or whether they put in another solution.

I think the upgrade kit was fitted in the field

Hi All, A while ago some of the ideal logics were upgraded due to a fault with them, I think a sensor and wiring was fitted half way down the heat exchanger. Does anyone know if the latest manufactured logics come with this same sensor and wiring fitted as the upgrade or have they updated the...

Thanks for advice. It is oil based. I will give it a good mix with the drill and mixing tool.

Hi All, I have a 3 year old 5l tin of barretine wood protective treatment in golden brown. When I poured some out today it looked like if was full of brown bits, I think the colour has separated to an extent even after a good shake. I'm using it on the interior plywood garage roof. Is it...

Springs look OK. One on passenger side is defo OK as we had a good look when replacing top mount. Thanks for your help as I was a bit stumped.

Driveshafts look OK, will check the roll bar bushes again and try the washing up liquid. Is silicone spray also safe to use? The boots on the sway bar links look OK but I will double check tomorrow.

Hi All My sons 2015 vauxhall corsa 1.2 sting makes a creaking or duh duh noise when turning at low speed or moving off after braking. This has been going on a few months. Garage thought it was top mount passenger side, that got replaced but noise still there. Inner and outer track rods...

Thanks gas112. Did think about a baxi 630 about a year ago. Will take a look at the platinum..

Have you fitted any yourself?

Have been reading up on vokera, is the pinnacle a major improvement for them, couldnt find many reciews of it. I was a little concerned over some of their past reviews of boilers and customer service.