Search results

Yes it was proper jack oil.

I bought a used sealey yankee 2 tonne trolley jack. When I got the jack it was low on hydrolic fluid, so I filled that up and bled the jack. The jack lifts ok but when lowering, it drops the vehicle way too quickly. And I'm careful when lowering not to release it too fast. Does anyone have...

I have narrowed it down to two quotes, one is using ply the other osb boards. What is the better option out of these two materials and why.

Thanks for the info both of you

Hi All, Our separate garage which was probably built in the 70s has corrugated asbestos sheets on it. We are intending to get the roof replaced soon and have had a few roofers round to quote. The roof as it stands is not watertight and needs replacing. Some of the roofers have said they will...

We reset boiler and topped the pressure up to 1.5 bar and the code didn't appear Ran the hot water which took a while to get hot, upon turning off the tap the pump started to make a loud clicking noise and took ages to turn off.

Hi All, Our boiler a Glowworm flexicom 30CX has stopped working this morning. F9 is flashing up, water pressure is 1.4 which is not normal as i normally set it to 1.1bar. No heating or hot water. Any Help would be appreciated on what could be causing this. Victor

Yes it does have yankee on it. What is difference between mk1 and mk2?

Hi All, I just bought this sealey jack second hand. Can anyone identify it? The label is quite worn, at a guess it may say 1250CX but i'm not 100 per cent sure. Also I have set the oil level 5mm below the filler hole but am not sure if this is correct either. All help appreciated. Victor

Thanks all.

Couldn't see any writing in cistern without taking the part out.

Nothing written on it. Will check inside toilet cistern later.

Hi All, The attached image is the broken flush mechanism of my parents toilet. They have no paperwork for the toilet so have no idea of make and model. Does anyone know make, model and if the you can get a replacement, if not what can I replace it with? Thanks all. Victor

Neighbour is getting to an age where it will become too much for them to deal with.

Thanks @Mike13. I will see if I can get the neighbour to agree to me putting a picture on here.

Mike13, that's exactly what it's done, would put a picture on here but it's not on my property. Stephenoak I agree but because it's wrapped itself around a 2x2 it's a bit different.

It's a neighbour's and he just wants to leave a stump at bottom.

I was thinking if i cut top first, then when I cut bottom full weight of it will be on chainsaw unless I don't cut all way through and finish with bow saw

Hi All, I have to cut down a wisteria plant which is about 12 inches across the base, it then rises up about 4 foot and wraps itself around a 2x2 at this point. I was going to cut it across the bottom first and then do the top before it wraps itself around with the chainsaw. Can anyone see...

What price have you got for each boiler