Search results

Hi everyone, just moved into my new house today. It's got a Raveneat RSF84 combi boiler in it and a programmer downstairs with various options like on, off, advance, once and the like. I've turned on the hot water tap and don't get any hot water. The boiler has a electric switch next to...

Hello people :D I couldn't wait for a reply as whether to proceed for the same procedure with the 3 port valve, i did the same and guess what..........it worked :D Thank you so very much for the original suggestion about the pump wires in the block connector, if that hadn't been...

right, update time, I did as asked and connected the 3 wires (L/N/E) that go into the pump and placed them in the connector block, I ensured the switches for the boiler and the pump was on and then flicked the on switched... The same happened as before, as soon as I switched the central...

no worries just got the same from b & q :D , will now try what I mentioned before about the pump wires and we'll see what happens.. Will report back within 15 mins BW

Right, I'm just going to buy a 'terminal block' from b & Q and will put the L/N/E wires currently going into the pump into the block itself and switch the system on, then if it trips it's not the pump. I'll just go to b& Q now before it closes and get one. Let you know soon as

I've not got a connector block to hand, could i substitute this for something or work out if the pump is causing the trip another way?

As regards the pump what would be a sure fire definite way to test if it was the pump. Regarding the earlier from kevindgas the pump is connected to a little white box which also is connected to another with the connection to the 3 port valve. The pump is a grundfos selectric, a few...

Hi the Central heating Mini-box as I call is the central heating circuit in the RCD box I believe. It's in the Kitchen and has a main switch and then 4 little switches for; cooker, sockets, central heating and lighting. When it trips the central heating 'little box' trips upwards to off...

Hi, Right I've been up this morning trying to work out which part is at fault. Following on from the comments I've read, I set the CH switch to Hot water only and turned off the pump and valve from the nearby switch and as soon as i switched on it tripped the 'central heating' mini-rcd box...

Hello Just to note about system: Traditional gravity fed indirect system with old ideal concord wrs240b boiler in 1st floor flat. I was just settling down to a late film this evening and my central heating is timed to come on between 2am-6am I heard it click on just after 2 as usual...

Hi there, I have a first floor flat so all on same level and have an old Ideal boiler from early 80's which works fine before you all say:P System is in-direct, gravity fed, 2 tanks in loft which I presume are cold water tank and F&E tank. A few weeks ago there was an air in bathroom rad...

It could be yes, although not totally sure. Pretty sure it will be ok, tile was definitley replaced correctly as I could see it so Hopefully won't cause problems on valuation

Hi, Yes, I'm aware it's not the most technically advanced system, however I think it will suffice within my flat as I'm only planning to be there another 2.5 years from now. If I was staying there for the longer term I've had a lovely brand new (rcd box?) put in with the safest and...

Morning, In my flat is has an electric box (Rcd I believe) where it is a small box with a main switch on one side and within the box there are 4 little switches for cooker, central heating, sockets and lighting. On the bottom of the box it states the maximum amperage is 60, From that...

Morning All, I bought my flat a few months ago and about a month in noticed a small hole in one of the tiles. I then phoned up the local housing association who said they would sort it and replace the tile. Within half a week the tile was replaced and they cut away quite a large part of the...

Cheers, thanks people :D Loving the 80's Gunpoint video :lol: BW

Hello. I am a leaseholder of a two bedroom flat and have just received a standard template letter detailing work that could be carried out at the building my flat is contained in. One of the points is: External Wall Pointing What is this, does it relate to wall cleaning or something...

Hi there, I have an old conventional boiler with 2 tanks in loft which is vented and gravity fed. My current programmer is Randall 3020P MK3 (an old one) which is also quite noisy. I want to change the programmer myself. I have found a digital alternative and the following link is...

Hi Agile, Annual gas bill estimated to be around £400-450 Still will think about replacing it in 3-4 years, hopefully it will last that long. BW

Hi Agile, Yes I can see what you are saying about replacing it. I would however like to get at least another 3-4 years if possible Can I surely get a new/decent refurbished case for the boiler? or am I being too daft? Anything I can do to extend it's life, it's only on boiler thermostat...