Search results

Have you got the link please? So they may have gone up up now after the Xmas rush

Yes I no how to take apart but even if that did have an over flow on the Syphon it's too high near the cistern lid

Could test that then adjust the Syphon height? At what height should it overflow?

How much lower are scrap copper prices in January? Thanks

I'm going to try now. Judging by the close up picture it should take a straight armed fill valve?

It should just about take a straight one? Sorry I just don't want to get it out and can't get it to fit.

May just take a straight one?

This is the alignment of the Syphon and fill valve I don't think a straight one will fit? The offset one I got the arm was too long.

Sorry mean with the Syphon in place a fluidmaster won't fit as it's straight would foul the Syphon. Just wondered if the offset ones at the same height are sold often there isn't many online

All the arms are different a different manufacturers one is unlikely to fit?

Thanks it look like a straight one won't fit would be fouled by the sphyon. It appears to only miss it due to the offset on the fill valve

Do you mean a compact Syphon? There is no chance of just changing the arm?

Yes sorry but it would foul it when back in place if the fill valve was a straight one.

Or could I just swap the float valve arm? Are they inter-changeable

I can't see the hole in the bottom of the cistern as the Syphon covers it. The fill valve at present over sets so it misses the Syphon at the bottom of the system

Yes I can't get a fluidmaster to fit needs the offset at the bottom. Otherwise the Syphon will foul the fill valve

This type

Do anyone know any where that sells offset fill valves like this

It has mesh I think it's that / the airater falling apart

I could screw the Flexi out under the tap? And screw in a copper one?