Search results

Don’t see the fused spur. Is the bellbox wireless or hard wired? I can see a cable in the corner but don’t know what it goes to, looks like it goes downward from the enforcer panel.

very misguided interpretation. as long as you aware of the potential consequences of removing the battery and or removing the tamper function and can live with it it’s your choice. Removing the battery does not affect the tamper switch at the bell box from activating the bell. If your going...

If it’s in the draw and not being used you want to delete it off the system and remove the battery from the device.

So a pictures may help give you more specific advice on decommissioning

Banham is an installer as far as I am aware

looks like a keypad failure of some kind, replacement keypads are available new old stock, I have 2 in the office for the example but these are not for sale but for customers that may need them that have this panel. I would look t replacing as cost wise you can get a new system with...

Check event log. If going in and out of engineering doesn’t reset it maybe you don’t go into engineering or issue still exists ???

https://docs.rs-online.com/37cd/0900766b806aee50.pdf . Only manual online I have found for the Nova 6.

Agreed moving the battery from the bell means it’s easier to down power from the panel at 4am to stop it ringing. But it doesn’t stop the tamper setting it off at 4am if it’s currently triggering the bell. Waking up, getting to the panel to disable estimated time to do so is 5 minutes, but if...

so you want to disable the tamper switch and the battery backup inside the bell box? you would need to bypass the tamper switch so that doesn’t register. You can remove the back up batteries from bell boxes, on many bell boxes turn off the battery backup, with a link. Don’t have a manual...

Can’t say as an installer I am a fan of the cloud variant and prefer Wintex hands down and ricochet monitor. The health check isnt much use to me as an installer unless I have gold membership and I don’t think it adds value to what I offer. Larger companies however the gold membership works...

Alas this is something that bugs the hell out of me with all manufacturers. I like to know why, not just how to fix blind. Alas not many that are helpful

Is it? Years ago had something similar but the smart com version wasn’t right just after they stopped being able to flash the old ones up. Texecom replaced a few foc smart coms.

No the old server addresses were has ip and port number. The default values on that version of firmware I believe. Can’t remember what they are to be honest just recognised them as old information and know it’s not used anymore. The 127.0.0.251 uses the smart coms stored info for servers I...

What’s strange is it generated the app codes but didn’t recognise the app codes in wintex or on the cloud using the old server addresses.

Resolved panel had old server addresses instead of 127.0.0.251

No worries.

hmm. What version alarm panel are you on? Menu 4 on the keypad should get you the alarm panel version. Hard to say why it’s going wrong pm me and we can take a look if you like tonorrow at some point. If it’s not too late I can have a look tonight for you but will have to via pm and or text...

12 zones in use over panel and one expander means you can 1 x 8XP-W and address it as address 2 zones 17-24

Write down what you want it to do and find the best match for your budget