Search results

normally i would leave skirting on when not tiling the floor gives a nice straight edge for the lino

or one of thes e

i take it this is cheap e-bay crap i have come across before with one of these Captive Plug wastes )http://www.notjusttaps.co.uk/spares-fittings-captiveplug-basin-waste.htm) that you close after you have used the shower to stop the smell from coming up the waste because the flexi hose hasn't got...

http://www.screwfix.com/prods/29333/Blades/Router-Cutters/Erbauer/Erbauer-Straight-Router-Cutter-1-2-12-7x60mm follow the link i think u also get 63mm and use a decent router with plenty power

they look like Conservation Kerb made wet pressed concrette with granite chips then shotblasted to give a textured look they also added coper slag to give a black speckell through the mix...

sorry to sound so negitive but the same old story spend a fortune on the structural side of the building then scrimp with the finishings first mistake using the decorator guy to do the tiling second pva and third not using rapidest forth not starting in the middle of the room. now a tiler would...

(Not sure what he's on about Salmonfisher, but if you're ever stuck without a diamond bit, you can get away with a decent masonry bit. You will however, need to build a small plasticine wall around the point you want to make the hole and fill it with water (so obviously this only works on...

all paper must come off if you dont you would just be sticking the boards to the paper thats left not the wall

explain please

this is probably what you are thinking of http://www.mitchellsworktops.co.uk/wall-panels.html try your local wood yard it costs about £100 a 1200x2400 sheet (not this make) comes in lots of colours and tile effect very easy to instal and clean always measure twice cut once very costly mistake...

first mistake was using pva should have used BAL APD Primer or similar how did you cut the tiles ? and as jefoss asked where did you start? how many did you break i would love to see the pics

There are 10 metal brackets with slight kink in, about 3 inches long and 1 inch wide for holding on the bath panel

only a guess but any tiler tiling onto a brick wall then taking it of to fit 9 mm ply will have a horse outside

should be ok and use this chisel in it http://www.screwfix.com/search.do;jsessionid=12LW4SRYRJXPICSTHZOCFFA?_dyncharset=UTF-8&fh_search=tile+chisel

hire a sds drill with tile chisel

http://www.screwfix.com/search.do;jsessionid=204PM5MCFGYLMCSTHZOCFFA?_dyncharset=UTF-8&fh_search=mutt perfect for lifting vinyl floor tiles

nice one

if he hasn't got the drills don't hire him