Search results

I checked the cable and there looks like a short. I have remade the cable end at the booster. It’s worse. I have a bit error of 2000 now.

Thanks for the info and thanks applied. Over and out.

Thanks it’s strange as ai get no picture issued on the other tv in the lounge and the signal bar is a lot weaker than the one in question.

thanks will do some checks with the meter. sky news seems better since checking that braid in the socket. Is that socket the standard type or is there a better version to use?

no portables. All biggish tv’s I will need to but sock connectors to make a lead up. All tv’s have a socket plate. I have a multimeter

Tv is on a bracket. I could try but its a big tv!

I swapped the cables over at the slx but made no difference. It’s either the tv, the cable, the connectors or the socket. Or interference?

i jigged the outer braid around in the tag. I might try a new socket to be sure

Also the tv in the lounge sky news signal is low but works perfectly

Sky news for example. The signal strength is better than the BBC news channel but Sky keeps pixelating

Thanks for all the info I will check the booster. It’s an SLX one if that helps? this is the socket plate...

I ran the cables and fitted the plugs. Terminated the sockets at each tv. No joints in between runs.

Apologies it’s the freeview signal is pixelating. System is tv aerial on roof to booster/splitter box. All other tv’s are fine.

I have six tv’s all connected to a booster/splitter. One tv has poor channel signal and buffers. where is the best place to start investigating? I have relaxed the lead from socket to tv but no joy.

Hi what’s the best solution to stop the sticking noise after painting frame? I have the frame plenty of time to dry out after painting with satinwood finish.

The corner I could live with but the pattern off in height looked awful

we have removed the paper now

Thanks all was also a number of air bubbles in the paper and poorly cut in places. stupidly the other half paid him before I got home. I have taken it up with the decorator and he says there is nothing wrong with his workmanship! He isn’t being at all helpful. I have asked for return of half...

Would you expect the pattern to at least match at the same height?