Search results

Hi, I'm looking at a cover for my horrible wheelie bins that need to get put in the garden. I initially thought of putting a concrete base down, but not sure that's really suitable with the paving slabs next to them. Also I need to get the bins manoeuvred in/out easily. I also wonder if I can...

Im not a plasterer but I'd never use something with filler on the packet to skim a wall!

That looks very unusual like the paint is just not bonding.

All done in seconds with SDS! thanks

Thanks, my old mans got an SDS so will half inch it this weekend.....and make yet another trip to the local SF.

Will these get through a concrete floor for toilet screws? https://www.screwfix.com/p/erbauer-straight-shank-masonry-drill-bit-set-5-pieces/9449v Not sure if its my drill not man enough and I need an SDS.

Does it flash before going AMBER? Have a look at the instructions for the error process. Could be you are calling for heat some the fan isn't working (i had this issue)...

Need to scrape it down to remove high spots.

I'd have no issues going Diamond matt over matt, I hardly notice on my stud walls. It does apply rather dark but dries out fine. In the high traffic areas you won't regret it. However I would have an issue buying a 5L quid tin for one bedroom at 70 odd quid ! :) The diamond matt can be watered...

I bought a Beko for new kitchen, after a month it wouldn't get below 8 degrees. Two weeks of engineer visits and it was written off due to low refrigerant. Mines also integrated and highly annoying that this happened but hey ho fridge replaced and sorted.

Phone Bosch up?

I think you'd be mad with a click vinyl, wouldn't it be slippery?

Done them with Polyx Osmo Clear Matt in the end ....seemed to be far more wetter when applying than last time, maybe just me. Look lovely now!

LOL went to take it out....lights on the front of it are on GRRR. I've got my sparks coming round for something else today so will ask him what i should be doing and to test it.

I'm wondering if this is where i've taken the factory plug off and its as you say gradually loosening after a while in the flex plate. I might stick a plug back on it.

Plot thickens.....when turning on at fuse spur it beeps once indicating power getting to it.

Plates off a fused spur...all turned on!

Hi, Sorry not the full story being given here! I removed the original plug to wire into a flex socket, this is then fused. It wouldn't fit in with a plug on.

Yeh I did as well actually, needed a new sill as I'd got foam on this one so ordered another one with the better quality mdf.

Got it wrong actually its https://mdfskirtingworld.co.uk