Search results

Wires

Hi, I want to install 2 bedside wall lights, we currently have a double socket behind the bed. It is on a RCD and a ring.. Can I come off it to a fuse spur and then direct to each fitting (They will have on/off switch built in) And of course make a note of this in the CU so we know the...

Thank you as always pal !

Ban All Sheds asked why 2.5mm . I understand that about the twin and earth, but I can use the flex? https://www.edwardes.co.uk/en/products/2-5mm-3183y-3-core-white-circular-pvc-flexible-cable-100-metre-coil The flex is easier to handle. If not I have a roll of this in the garage aswell...

Good tip with the holes.. You will need 2.5mm as its power ? I'm just going to use twin and earth flex it won't be exposed at all only going through the wall.

Last one I promise ! 3183Y 2.5mm okay ? I'll just poke it through the wall so it will just go into the back of the socket, I'm not changing the position now.

I've used it a few times but yeah, pain in the arse. So just use 2.5mm flex come through the outside wall and run to the socket? Should it come through to a junction box then go from there to the socket ?

Would you use 2.5 mm armoured?

Thanks pal.. only issue is this one is a bit higher.. so would you recommend running a small amount of flex outside to get the socket in the correct position ? Or conduit to the Socket ?

Sorry for being thick! So this is on on RCD.. but if all on RCBOs the RCD not needed..

I have another socket on the other side I can utilise and nothing spured off it.. so that would be okay? I thought it was just an MCB?

Bit busy behind the socket like...

So seems to be on a ring.. The socket I want to use already has a another twin socket coming of it not this was done after the build so can another one come off it?

Down stairs sockets

Hi...this is the board

I will get a picture, its just a double socket in the dining room

I will double check before I do anything. It's a newbuild so suppose could be a ring main. but will get into the board and double check

Just on an MCB so I'll buy an RCD Weatherproof socket.. thank you !

Just a quick question.. I have a twin socket in the kitchen, and want another on the other side of the outside wall for a water feature. It is on a radial circuit so was hoping I could just drill through the back to the outside wall, fish some 2.5mm twin and earth and wire up to the internal...

Ian , Can I just take the cap of the valve and screw this on : https://www.screwfix.com/p/danfoss-013g602438-ra2000-white-angled-trv-with-lockshield-sensor-15mm-x/5448v#product_additional_details_container