Search results

With the clock switched on the boiler never fires up even though all the stats are on and calling, i need to turn the boiler mode to rads to get it to fire up but the floor doenst feel like its getting warm

There is only one valve in the whole house, maybe this could be faulty as i cant seem to get either the ufh or the radiators on seperaltey or even get any of them that hot for that matter?

If you wanted to just having the ufh on what would do please?

For anything to come on i have to select the clock to on or the boiler mode to rad/water

There are 3 floors, top two have radiators each controlled by a single thermostat not pictured, the bottom floor is ufh

This is my central heating setup, combi boiler with ufh downstairs in zones controlled by the thermostats and radiators upstairs, how do i turn just the ufh on or off, or just the radiators upstairs on or off or both as i cant seem to regulate what comes on/off?

So I can use the programmer with hives for the ufh but not for the upstairs with hives?

Yes thats correct

No sorry the thermostats for the ufh downstairs are programmable the ones for the radiators on floors 2 and 3 are not you just set the temperature. The main reason I'd like to change is the ufh thermostats aren't the easiest to set up so I end up just blasting the floor then turning it off which...

Hi thanks for the advice, I did right there are zones downstairs for the ufh each operated with 3 thermostats downstairs then radiators on floors 2 and 3 with a thermostat operating each so 6 in all. Just another thought would I be able to turn the heating on and off via my phone when the hives...

Is that definite? Are wired hive thermostats different to the usual ones available or are they all wired or wireless? Thanks again

Would I still have to change the control panel if I used wired hive thermostats?

Would I still have to control panel if I used wired hive thermostats?

And 1 of these on floor 2 and another on floor 3 for the radiators

There are x4 of these thermostats downstairs for the ufh zones

I have a 3 storey house with ufh downstairs which is on 4 zones controlled by 4 thermostats, and radiators on floors 2 and 3 with a thermostat controlling each so 6 thermostats in total. Would I be able to change the thermostats to hive ones and what would I need replace the control unit also...

Will it work on 4 zones if I have it on the ufh

What about if I just had it on the ufh downstairs with 4 zones

I have 3 floors, downstairs is ufh with 4 thermostats for each zone, floors 2 and 3 are radiators with a thermostat for each so I'm guessing I'll need x6 hives which will be pretty expensive are they really that good? Also to I need to check the wires on the back of the existing thermostats to...

I have polypipe thermostats that operate my ufh but they are not the easiest to use or regulate, how easy would it be to install hive thermostats? Any advice much appreciated cheers