Search results

It's basically same as the inflateable hot tubs but with solid sides and better insulation

This is the CU in the garage fed via swa 20m from house. There is a spare b16 rcd, do u think this would be suitable for a sparky to connect an outdoor socket to? Thanks again

I thought u were implying the heat depends on how you connect it but yeah I see what you mean but these things are sold as being able to plug into any socket so I'll see how it goes

Why would it take a while to heat up? It's a brand new hot tub designed to use just a 13amp socket supply?

just ordered a 13 amp hottub and deciding where to put it in the garden. I will require an outdoor socket putting in. Near to house would be easier but we both would prefer it at the bottom of the garden. If this is the case may be able to bring a socket from the garage which is nearer. Would...

No but ive plugged the new silver part of the pump onto the new terminal box withoit it being plumbed in and it still doesnt light up or spin

Ive just picked up a new replacement pump with the black terminal box and still no joy which is why i started thinking am i missing something? Just rechecked and there is 233V at the terminal box on the side of the pump so then does this mean the new pump is no good

Heating is currently on, thermostats calling for heat, actuators lit up bit nothing on pump

Yes correct

These are brand new? This is the terminal box im referring to

Which electronics?

No although ive a new complete pump and terminal box i only changed the terminal box and still no good so i plugged tge new terminal box into the new pump without plumbing it in and still no lights or doesnt spin?

Yep the pump spins freely, i only changed the terminal box on the side and lead as that was what was burnt out but but not the pump. I had to buy the pump because it comes with the terminal box so i have tried plugging the new pump in whilst not plumbed in and still no lights or doesnt spin?

Im starting to wonder has it always been like this since i moved in because i put the floor on and it gets hot yet im sure the pump never comes on as ive never heard it, it gets red hot and theres no lights on it as tho theres no flow through it, how often should the pump be on on average? Im...

Help! Ordered and fitted new suppressor lead which i found was faulty but pump is still not working and has no lights on but power at the pump,

I was yes, think ive got it tho, open circuit on live on the wiring, live was in half inside that sealed housing i mentioned, hopefully a new cable kit should sort it thanks

Theres power at the pump and the terminal but no light where the 3 speeds are which im sure there was before the fault, the pump is brand new? Thanks again

Yes

Recently had grundfos ufh pump not working, found circiut board on terminal box on side of pump burnt out. Changed pump but still not working? Feed is live from slave unit into pump but no lights on side of pump? There is a block on the wire which leads to the pump but it is sealed, could this...