Search results

You need to do a continuity test making sure the circuits are isolated and not live, and also a polarity test make sure the live is live ect

you should have a manufactures book for the boiler this will tell you the pressure is its 1 bar or over it will be ok

try turning the pump down (theres 3 settings) this will reduce the speed of the flow

turn the water supply to the house off then turn all the taps on until no water is coming then turn the taps off turn the water back on starting down stairs turn taps on until water supply is normal then turn the tap off then on to the next tap do this until all taps have been done (if any taps...

you will need to bleed all the rads, if you keep needing to bleed the rads then you are getting air in some where you need the system pressure tested

The new rads will have TVR valves some of these stick if you remove the top and the inners you will find a pin, that sticks, if you pull it up and if it moves then put every thing back as was the rads will heat up then

No you can not go from the lights the power point needs to be in the ring main same as the rest of the power points

If your thinking of using a pump make sure its wired in correctly or get some one who is part P qualified as you need to inform the local building regs office, if you do it your self you need to notify them before you do it. then pay for an inspector to come out if you get someone who is part P...