Search results

  1. S

    Water Problem - New UPVC door

    make sure the drainage is working by pouring water into bottom of door frame and observe it flows out of the drainage holes. I am and have been a window and door service engineer for more years than i care to say Have a few times come across new doors where drainage hole not connected...
  2. S

    Need advice on this ...

    show us more of the door is it pvc take photo from further back would be a bonus
  3. S

    Can't open upvc front door!

    it looks like a pad out lever in and the latch will only turn from outside when you turn the key. If i am right and this is the case then try turning the key whilst pressing on the door If it opens with pressure on it i would advise that you lubricate the latch front and back and the latch...
  4. S

    Split spindle offset lever/pad multilock door mechanism

    if you have two square holes in the door gear you should have the pad handle fitted into one on the outside and the lever handle fitted to the other on the inside then your door gear should have an active latch and the door just closes without locking when you pull it to It may be that your...
  5. S

    Split spindle offset lever/pad multilock door mechanism

    A split spindle and an offset handle are 2 different types of beasts The split spindle works along the same shaft with the spindle and the door gear being split in two one inside and one out and door should not not be able to open from outside without a key a pad and lever is normally...
  6. S

    Building in electric meter

    Just what i was thinking Big Thanks :)
  7. S

    Building in electric meter

    Hi all I have to build in an electric meter box that currently exists in a pvc panel in bottom half of sidelight in a porch The box will be built in and is already connected up and has been for years This is all part of a porch extension. My worry is that there is only 100mm between box...
  8. S

    Gas Fire Coals

    I am new here so if wrong section please point me in right direction I have to replace coals in a straxgax 16"" coal effect gas fire The loose coals vary in price from as little as £7.00 for 10 and upward . The standing coalblocks in the fire there are 2 are £70.00 and £35.00 each So a new...
Back
Top