Search results

he has given it a c2 yet no investigation needed and a comment wall lights not made to bsen 60598 standards...client has brought now all brass fittings at great cost ..its a niceic domestic installer and i admit a intense but over the top in my opinion report...like all proplems either c2 or c3...

taking over another sparks eicr form as he has walked...actually a good report seems well done but loads of minor codes ...over 40 items and i start to wonder if he was chasing money...there was lots i would give a code but as its a dated cottage no real action where as hes been doing very minor...

thought that maybe the case so will wait till an old fitting comes along...cheers

Whats the best way without power supply to test to see if the above type bulbs/tubes are good...both with es cap and es cap...please :wink:

The door switch to fail and someone to open the door to work on the blade and someone switch the start button on which is 6 inches away from the door.....yeah i get it !!!! could you give me some odds on that and do not forget that someone should be competant so hence should have turned it off...

they are not relying on the opening of the door to stop it......the door is closed permantly and only has access to the blade wheel...its locked...the stop start is used to operate the saw....but should the door be openend by mistake the machine would shut off...and if left plugged in and...

the machine would not be able to start with the door open as the stop circuit would be broken the the same as hitting the stop button...it could not be reset until the door is closed...i do take on the injury side but you would do well to have a death unless you physically offered your neck and...

i dont know if we are looking at this too deep , i only asked as i was given a switch to try to fit and it was a simple 1 amp 230v door contact switch. The machine has a stop start old metal type beside the door so to try it i diverted the stop wires through the switch....it worked fine but was...

It has a contactor but not easy too get too...the machine itself is on a red 16 amp 3 phase plug and the 3 phase is via a generator...limit switch?...i just want a micro switch to do the same job as the stop part of the stop start button if the door is openend ...there is no transformer as i...

I have to fit a micro switch to a very old machine door so it cuts the power off if the door is openend...i can easily divert the stop button circuit to activate but was not sure as its a 16 amp 3 phase machine do i need that type of micro switch as the best i can find is 15amp 380v...or...

i appriciate all help but agree yes these are simple 4 amp area bench grinders like you have at home ..they will not pull you in too much , fingers maybe..the only thing i could do without is 3 grinders all together but need 3 starters as each may be used at different times. they are on the...

the grinders will each be fitted into the dol starters with so will not be able to be unplugged. How do we feel about the other ones that have a stop/start and sometimes a e/stop old type fitted. surely to just add a new yellow mushroom head beside the on present does not actually make it...

thank you for your interesting replys to date....heres how i was going to go ahead and welcome your views. the grinders are plugged in 13 amp i was going to omit the toggle switch and fit a direct online starter to each with a emergency stop beside in a n/c contact so to hit it pops out the...

i am only just starting out on commercial work after 35 years in domestic. I have to fit emergency stop buttons to some machines..most are just at the moment on plug tops like small grinders with a on/off toggle switch on the machine..and i allowed to just fit a E-STOP with key to the flex or...

well thank you all for your views and replies...my concern is when i first visited the job to price although 2 pumps where in the system the client said he was happy to just get a temp system working and hence i priced for a s or y plan but asked to meet with the plumber before i start as its...

So u would go c/h on to stat common..stat calls to brown of valve..opens valve which makes orange and fires boiler and it wont harm back feed to other orange of other valve. And same for h/w but via c/s where if thats correct would you grab lives to greys from and what are the function of them...

I am not too bad at heating in general but can someone guide me through this just to be sure on the lives side . 1 STAT which controls a central heating valve and pump plus fires a boiler A cylander stat which controls a hot water valve and different pump plus fires the boiler. where are each...

in love with victoria pendleton