Search results

Yes, I have a PIR in the hall, Zone 3, 'Timed inhibit'. There are 3 other used zones, 'Immediate'. Note I do not part set the system when I use the LCD keypad on the landing. I always use the default Program 1 (there are no sensors upstairs). One thing about the log that really surprised me...

Update... (long, sorry) On the night 17/18 Jan, I set the alarm (sensors downstairs) on the keypad upstairs before going to bed and... low-and-behold I woke up to beeping at 0430. I rushed to the keypad and, as suggested by Sparkymarka (thank you ), I let it go into full alarm. I then stopped...

Thanks for the tip. Entry device on front door is magnet switch, not a PIR detector. I checked the door switch by using the 'Chime' function and it's operating as expected. I've stopped setting the alarm when going out as I am concerned the alarm will go off and disturb neighbours. Not a great...

Yes, got up (rather shaken - thought burglar opened front door!) and turned if off (unset the system) and it stopped. Half an hour later, it beeped again and turned if off. The event logs show nothing about detectors being activated.

Hi Marnhullman Newbie here Any developments on this? I have the same system and a similar problem. 12 years old and has worked absolutely perfectly... till now. I set the alarm on the LCD upstairs to arm the sensors downstairs before going to bed. Beeped around 0600 hours. No apparent reason...