Search results

newscan - pizzamaster, is the mfrs and it's twin deck

at the back of the oven it says, 240 V AC 1/N/PE the guy I bought from said that it is 16Amp

I have a 32amp mcb for an oven. The oven is connected to a 2 gang cooker switch. Is it okay to plug a pizza oven rated at 16amp. this is not for permanent use just like one a week for an hour or so. I wont be using any other appliance at the same time.

Cut the end bit of a 12v adaptor and connected the 2 wires to the blue connector.

resolved

I have got a 2 wire siren and attached the inside image of the siren below. Just looking for some indicators and confirmation that I can connect a 12v adaptor to the DC in(blue connector) to power from mains. .

can you please explain in details how you achieve this.

I have a cctv system sending me alerts and wanted to scare off any unwanted visitors. So want to be able to sound a siren at at will and switch off. The only economical way is to plug this unit to a wifi plug so i can activate it remotely.

Thanks all for the suggestion. John D-that's jolly decent of you.

I am looking to install a mains powered sounder to be turned on/off at will. Would appreciate if anyone can point me in the right direction. I already have cctv system just want a sounder. All the ones I have found are 12v.

Agree with the material cost, any idea at to the labour cost

Hi I have a issues with a gulley (250mm) between a wall and roof. I have attached a picture and am looking for some idea on cost of doing this with EPDM. The length(run) of the gulley is 8m. I am looking to tuck EPDM under the second or third row of slate (and then just run over the top of...

Thanks fr all the replies. The problem is I have fluctuating water temperature and the engineer who came to look at this said that it needs a new plate heat exchanger, asked him if he could clean it and he said that they are difficult to clean, didn't bother looking at it. I also have a magna...

Hi All Just wanted to get an idea of the labour costs to fit a Heat exchanger and Expansion vessel The boiler is around 7/8 years old and Viessmann had replaced the heat exchanger in 2011 thanks

Hi How much should I be paying to hang 7 x 2.2m drop of Muraspec wallpaper 1.3m wide. Is there anyone in Leicester that can do this for me

thanks for the valuable input. I am only hoping that the flex hose inside the brickwork is not as brittle as the exposed side. As it stands it's not flexible anymore and the exposed/outside part is quite brittle.

yes I can access the pipe, and done so today. When I tried to just tape the flex pipe from the waste it just cracked, it's very brittle. I am thinking of inserting a a 30mm pipe in the flex (that is going through the wall) and then put an elbow and then join a straight length to connect to...

I have attached a picture of the position of leak, quite awkward position wondering if someone can guide me how best to fix this.

leak