Search results

ok I've been doing a bit more reading on this - but don't quite understand so bear with as majority of rads have TRVs do I need the room stat? ...and if not do I just connect the COM (1) and ON (4) of the programmer to the 1 & 3 connections of the boiler? like here but A and B are...

Cheers guys! programmer is a Danfoss TS715 Si and the stat is non-powered two wire I have 3 core + earth cable and twin and earth so I need T&E to power the programmer L & N, 3 core for COM, OFF and ON and T&E to the stat? and both run to a wiring centre/junction box next to the...

Hi All, I need to know what cable to put in... Mum-in-law has a Biasi combi boiler with a wireless Salus thermostat that she just cant get on with. I have a wired Danfos controller and wired room stat to replace it with and will run some cable this weekend and get someone who knows to...

cheers guys Just the info I needed :D

Looking for a ball park figure for the cost of a roof truss I'm going to widen my garage and just pricing it up - existing trusses run front to back 5200mm span roof is about 1750 high at about 30-35 degrees, ridge across the centre Marley double roman tiles are they £20 each or £120...

I'm currently plumbing for a new kitchen. Do any slimline dishwashers have hot and cold feeds or do I just plumb for cold? Cheers :)

ok you can step down guys! found it... http://www.diynot.com/forums/viewtopic.php?t=124143 I hate it when people post without doing a search first :oops:

I'm relocating my boiler into the attic, can I discharge the condensate out under the tiles and felt and into the gutter? :)

Crickey! are you suggesting I apply common sense? do they sell that in B&Q? :wink: Thanks guys :)

as the title says really, does (or should) the cooker hood and under cupboard lights run off fused spares off the kitchen socket ring main? :)

I'm going to fit a designer rad to a narrow wall to the side of french doors, the rad is just narrower than the wall and I'd like to put angled valves out of the bottom of the rad with the TRV pointing straight down and not sticking out of the side. Will it adversley affect the operation of the...

thanks - so that's 4x2 going between the joists then :)

I think I'll need to shop carefully as what i described above is available too...

cheers for the replies guys I haven't yet bought the WC and frame so i'm testing the water to iron out any potential problems before they arise I've just looked at a pic on a web site of a frame and there seems to be 8-10 or so fixings and not the two into the floor and two at the top i...

thanks for the reply the frame sits on the floor and fastened back to the wall at the top, the cantilever of the WC would have the effect of putting the top fastenings in tension - pulling out of the wall hence my concern i was thinking rawl or fisher bolts /studs but i've no experiance...

:lol: :lol: made me laugh! :twisted: http://www.toolstation.com/shop/Plumbing+Heating/Sundries/Pipe+Freezer+Kit+220ml/d20/sd2703/p38656 and toolstation is cheaper than screwfix for the freeze kit :)

can anyone recommend the best way to fix the steel frame back to a dot & dab plasterboarded blockwork wall? cheers :)

I'm looking for a solid resin worktop 2000mm long 220mm wide and an integrated sink in the middle. can any recommend where I can order one at reasonable cost many thanks :)

cheers Sparkyspike :) B.A.S. thanks for your concern ;)

32a at the house consumer unit seemed like a good idea at the time, the fuse box makes to convenient to isolate sockets or lights rather than climbing back down stairs extension is not signed off yet so i'll get it checked out by a pro