Search results

The heating does get used in April and September too when it's slightly cold too. It's not just the heating not coming on in colder months but the water too. The readings won't be different from colder months or warmer months. The issue is condensation and oxidisation. It's only worth checking...

Don't some tile vents come with a flexi hose attached? The extractor pipes are 100mm guessing you need an adaptor for the 110mm?

I've already done that. As stated the issue happens in colder months. There isn't a fault with the system, pump, valve or boiler. What I meant the loft gets condensation in the colder months and one of the wires becomes oxidised due to the condensation. If a cylinder stat is faulty will it...

Wiring is all fine. As stated the issue is in the colder months not the warmer months. Both hw and ch work fine from April to end of sept. Come on straight away etc. As stated much earlier one of the live wires in the loft became oxidised due to condensation but the wiring is covered up now. The...

The legendary problem has returned. I have been advised it's due to condensation in the loft. And today the loft had 55-60% relative humidity but had not heating or hw. The garage had 60-70% where the boiler is located. I've bagged up the wiring in the loft and put a plastic tub over it too...

Is it vented through roof? If so does it have the rigid pipe? Does rigid pipe vibration noise or any other issues?

What about an inline fan?

Can you connect rigid within loft space instead of flexi?

Where does the condensate trap run off to? Does it need venting off? Insulate the rigid pipe or the flex? Would rigid ducting be any good for inline fan?

How will it allow continuous trickle without being on particular if vented vertically through roof?

Is the pipe rigid or flexi? If flexi doesn't it get condensation build up

I am after 2 x new extractors, the dmev offers the continuous trickle option but their extraction rate is less powerful than an in line fan. Are there any inline fans in the market that offer humidity stat or continuous trickle? Also can rigid ducting be used for inline fan or does it have...

Looking to vent 2 extractor fans through pitched roof. I know you can get the tile vent type as well as the cowl. Which one is better?

Which brand do you have? The nuaire ones seem to have different speeds. Surely you would need a different speed for a large property compared to a small 2 bed house for example.

Having looked at their video I am sure they have several speeds but that remote only shows boost?

Model number please?

I was referring to the speed settings / flow rate etc

I am after a PIV unit, however must seem to have controls on the main unit itself which means going into the loft to change settings. Is there any units that have a remote control or settings be changed on the landing by removing the cover plate? Thanks

Thank you for that. It's awkward to get 4 inch elbow out of that. Not a fan of the loft as it is! What about get some vents for the eaves? I got some flat roof I can stand on from the outside, are they easier to install? If you are venting straight through the roof would you use the...

I'm trying find video or illustrations to assist without going up in the loft first