Search results

At the moment it's working fine. So I can't test. When it hasn't worked, I have heard the valve click to heating and also hot water, whichever is selected. It's a new valve head and the the spindle moves freely on the body hence I didn't do a full swap. When it's running (heating or hot...

Yes it does, already checked.

I don't understand? Could the issue be due to the cylinder stat? But then the test the other day worked fine. Rads were changed a few months ago and some pipes were adjusted, wondering if any wires close to the pipes might be affected due to the heat of the pipes.

To make it more confusing 2 on the backplate doesn't have a wire

Opinions from others I received, from you it was obnoxious behavior. Previously you knew I tested the wires yet you told me to do it again, I let you off last time but you pushed your luck this time. Get yourself on a dating site buddy.

From Terminal 3 on the pcb to the L on the programmer backplate.

Frustrated?? Like I said you don't need to come on my thread. Get a life and jog on grandpa. Perhaps go on a dating site. If you think I haven't taken advice, then you need to visit spec savers. It's people like you with your obnoxious, ignorant attitude that let this forum down. You admit...

I don't find your attitude very helpful, it's a public forum. I didn't ask you to comment but you seem to be condescending quite often in your posts on this forum. You're asking me to rewire the whole thing?? If the wiring has been fine for 25 years why do I need to rewire it?? Everything is...

Live at the programmer. Problem has started again. And the other end of the brown at terminal 3 at the programmer side looked like this... Subsequently I've stripped some fresh copper and the problem is still there. I've checked at terminal 3 and that side was clean copper

And the current independent room stat?

But wiring would need to be altered if the current stat and programmer are separate and the "smart" one is integrated. Whilst technology does have its benefits, don't trust the "control heating by an app" would definitely be open to hacking one way or another. Wouldn't be surprised pretty...

Once they start playing up they're a big issue to sort no?

I meant in store.

Got a Drayton LP522 and honestly it's the most difficult and annoying user menu. These models have been in use for 20 years at least. They could have improved it in that time. Had a siemens for 15 years and it was very easy to change times / change 5/2 to 7 day same etc without the need of...

I meant from before. As the problem is intermittent and with that being the only code...

Nope. But as there was the original s30 code when pressing i

I have checked again and valve does move over and the central heating remains on.

when both heating and hot water are on and room stat is demanding heating and water cylinder stat is down the boiler switches off. But It doesn't switch off when room stat is down and cylinder stat is demanding heat.

But the light won't indicate where or what the fault is?

Yes it does