Search results

A quick update for anyone interested :-) As the micro switch is no longer available I decided to replace it with a 2 port valve and cylinder stat....a much cheaper option! When opening the junction box I found a spare wire in one of the cables feeding the boiler/pump which was next to the...

Perfect thanks. What would you suggest for a replacement? The switch base where it attaches to the valve body has broken and the valve appears seized partially shut, so new is needed. Would I be able to replace with s plan zone valve and use the micro switch wiring ? as not sure where the...

OK thanks. Here are some pic's of the top which had broken off the valve body. The body looks very similar to the new one. I seem to come across all the non standard stuff!! How about this for the mother in laws toilet flush :-) A standard flush unit would not work as...

Hi all, I have a faulty danfoss Ravi to replace which has a cable attached with a 4 pin plug. I have not removed the junction box this cable goes into as I assumed it was similar to a 2 port valve with a feed going back to boiler. Looking on the net for a replacement the Ravi now has no...

Issue with boiler makes sense, as need to be gas safe to open up I believe. If I let you know model of boiler would someone let me know if it needs to be opened? Have changed loads of rads and never had a problem refilling system etc, but there could always a first time! Thanks for...

Hi, Just after a bit of advice. I am replacing a bathroom and the customer wants his old rusty rad replaced for a towel rail. Its an open vented system which I was going to plug vent pipe and feed pipe in loft and try and change without draining down if poss, if not drain and refill with...