Search results

Something like this? :- http://www.amazon.co.uk/Channel-Hikvision-Turbo-1080P-DS-7208HGI-SH/dp/B0133PK6DE/ref=sr_1_14?ie=UTF8&qid=1451844770&sr=8-14&keywords=hikvision+turbo+dvr

Cheers...I need to remove it because I'm fitting coving....

Hi, I ve got a Guardall Apollo 15 Sensor in the corner of the room I want to decorate...I need to temporary remove it but still have the rest of the alarm system working...do I need to connect any of the wires?....thanks for any help... Wires I have are :- Black,Red,Green,Yellow,Blue and White.

I need to work on our chimney to do some pointing and repair work..Its a bungalow and I was hoping to use something like this :- http://www.toolstation.com/shop/p25939?table=no but don't think it would fit...is there anyway else I can secure a ladder? Cheers..

I have mate...cheers..

Well what ever it was it worked...

All sorted..... And for anyone with the same problem:-(taken from another forum) Reset is as follows.. Disconnect power - (battery and mains) Remove all wires from terminals 17(PA) and 27(set+) Fit a link wire between these two terminals and connect power. System will power up with no...

Its sounding internally....it had blown the fuse...I replaced it but still sounds and cant stop with keypad...

In the manual for the Accenta 8 it says the factory code is 0123....Ive tried that but still wont stop the alarm sounding...

Accenta 8 Aritech AS294 Guardall Apollo/Elite Sensors

Ive been doing some decorating..Ive just pulled the bunch of wires from one of the sensors through its backplate without isolating the power supply to the alarm(240v)....Ive rewired the sensor and now I cant turn alarm system off :-( Ive checked all the fuses in alarm control box but still wont...

Im decorating a bedroom, Ive mixed a bucket full(7 lts) Solvite All Purpose Paste...the bedroom is 3/4 decorated but Ive still got half a bucket of paste left....how long is this likely to last?....I cant start the papering again for 2 weeks.... Cheers....

My Central Heating system has been fitted many years, it has been insulated by using some sort of hessian wrap...would it be a good idea to take all this off and use foam insulation instead? Cheers..

Cheers, much appreciated. I'll try that..

Just checked and it feels tight but gave it a little tweak..

Cant see any visible leaks on the valves and have put tissue round the pipe to see if there is any dampness - but nothing - stays dry.. Been round again and checked all of the bleed screws but all seem to be tight..

Theres a little valve outside the front that drains the complete(heating) system down...

I fitted another radiator to the system at the weekend...soldered joints(2 x T's ,2 x straights and 2 x elbows... Now the pressure is dropping on the Boiler, it can only be the result of my soldered joints....but I have checked and can see no visible leaks... Is there an easy way to find out...