Search results

I haven't tried this yet... I will try this over the weekend and report back.

I used Cat5 4 twisted pairs. Using 3 pairs for power and one pair for video. that pair then connects to a short length of rg59 coax terminated on a crimp-on BNC connector. The Monitors are LCD TV's with an AV input.

I have two monitors connected using the AV input and i get the same problem on each monitor!

Just fitted my first cctv at home...not very happy with the result...I got a good picture but have a "Ghost" picture moving across the screen constantly on both cameras. What am I doing wrong??

Scolmore Polar and Mode range all have interchangeable switches so a distributor can easily make up a 2 gang intermediate or whatever else you require for a fraction of the price of grid! Hope this helps

You will find that hese switches come with changeover contacts, so two-way switching is NOT a problem using them! now as for intermediate............

you should folow instructions for BELL (BSTL) as that's the make of your old handset. hope this helps

I'd appreciate a copy too if possible...many thnaks

My LABC is insisting that I arrange and pay for the inspection and testing, They have even produced a leaflet stating the same!!! Do I take them to court if they refuse? What are my options?

thanks for all the replies....I dont think they drape things on top although i cant be certain..what I did notice is that both heaters had both input and output set to maximum on no. 6!

I have been called out a few times to a flat where the storage heaters keep tripping and I have to keep opening them up and resetting the thermal overload switch....why does this keep happening??? any ideas? Thanks

Welcome to te real world Richard...Happens all the time mate!

i'm very interested too, Please. Thanks

from my experience they dont always give a damn! I recently had to call the DNO to replace incoming header. tthe bloke replaced it and left it without fitting any seals whatsoever, I chased him down the drive and asked what he was doing. his answer: Oh i have run out of seals, dont worry about it!!!

I'd rather look for one into moonlighting :lol: :o :D

well what about this? I have two identical circuits with 10 50w halogens on each, they are both on 600w dimmers each. One of the dimmers is fine, the other is getting very hot! How come?

its a year old, been doing it for 2 weeks now. its in a soft water area, no scaling at all.. called triton today, they told me to put it on cold setting remove the shower head and let it run for 15 minutes. tried this, made no difference, called them back, now they say it may be the element or...

Got a Triton Bewitch which has started cycling hot and cold every few seconds. When I switch it on it warms up, then the heat light goes off and the pressure light comes on and it cools down till its cold then the pressure light goes off and the heat light comes on again and it warms up again...

JJ, I havent tried that. will try it tomorrow when I return to the site!

Bernard the fly leads are connected correctly to Live and Neutral Not to Live and Earth!