Search results

  1. S

    CLOSED: Ferco Multipoint panel removal question - pics inc

    Thanks lads, as luck would have it the neighbours had a window company in doing some work so I grabbed one of them and asked them to take a look. They need to remove the panel as Nooz suggested. They're also going to replace the lock for me too. Thanks for all your help and at least it wasn't...
  2. S

    CLOSED: Ferco Multipoint panel removal question - pics inc

    Thanks for the response Nooz, I've climbed up on a step ladder, removed the top plastic cap and looked down the panel that is on the edge of the door (the bit I need to remove to get to the screw that's holding the barrel in place). Here's what I see: It appears to be attached with...
  3. S

    CLOSED: Ferco Multipoint panel removal question - pics inc

    Hello everyone, I've got a Ferco Multipoint door. Since we moved in the door has been locked without a key and I want to replace the barrel. I've managed to snap the barrel and removed the largest side however I cannot, for the life of me, remove the other side of the barrel which seems to be...
  4. S

    oven snuffing out and clicking until door is openend

    UPDATE: Chaps, I wanted to update you with this. We've now got a second hand oven (which I was assured was working). I got a friend of friend who's a gas engineer to install it. Now the cooker hob works (which is seperate) and the grill on the oven seems to be working properly however the...
  5. S

    oven snuffing out and clicking until door is openend

    Guys, A massive thanks for the reply's - I obviously need to get this sorted asap. What is the best thing to do? Should I call a Hygena specialist, a regular oven specialist or get a new oven?
  6. S

    oven snuffing out and clicking until door is openend

    Hi everyone, My wife and I are having a problem with our oven. When we first turn it on it clicks and ignites fine but it is garaunteed to go out in a few minutes and start clicking to be ignited again, only when I go and open the door does it actually light up - this happens about 2 or 3...
  7. S

    halogens keep going out on my kitchen lights

    I don't have the ability to test teh voltage but the leccy who came last week did and he said they were fine. The lights themselves were from John Lewis, these ones http://www.johnlewis.com/230650043/Product.aspx?SearchTerm=RecentlyViewedList I just use Tesco halogens, at first the normal...
  8. S

    halogens keep going out on my kitchen lights

    Hi Guys, I've got 2 strip lights each with 4 halogen bulbs on (50w). Ever since installing them I've had a very short life from the bulbs and find myself constantly replacing them. I've had an electrician in to check the current and the wiring and he has found no faults. I decided to...
  9. S

    Raised bed - left over decking

    Thanks for the reply Richu, I had thought about a planter and effectively that's what I want to create. I should've been more clear but it's the decking foundation timber that I have left over, so something similar to this: I would've thought that a structure like this attached to 4...
  10. S

    Raised bed - left over decking

    Anyone?
  11. S

    Raised bed - left over decking

    Hi everyone, I've got a left over timber from my recent decking project and I want to use it for a raised bed. I have the area cleared which is situated next to the wall of my garage and I want it to be about 3 decking boards high - so about 12 inches or so. I was thinking that in order...
  12. S

    Can I do my own outdoor lights but get a leccy to finish?

    Good thinking fellas, I have a mate who's a sparky so I'll get him round to give me the initial advice. Cheers for that.
  13. S

    Can I do my own outdoor lights but get a leccy to finish?

    Hi folks, I'm currently doing a big bit of landscaping in my back garden. Something I've always been keen on is having lights in the back garden but I know there are rules and regulations that prevent you from wiring up your own electrics. I respect the rules and regs and my own safety but...
  14. S

    Curtain Pole attachments have dislodged - help!?

    Guys, Thanks for the reply's. I'm going to go with the attaching wooden supports to the joists to make sure these things never come out again. I appreciate your help.
  15. S

    Curtain Pole attachments have dislodged - help!?

    Hi folks, how is everyone? I've had a slight nightmare with a curtain pole that spans a bay window. I knew it would be a nightmare because in order to allow the curtains to open and close fully I could only attach 3 brackets - one in the middle and 2 at either side. To make matters worse the...
  16. S

    Lots of problems with Vaillant Boiler, not sure what to do

    Very interesting money_penny. I imagine you are getting so much wetter now that the shower works properly :wink:
  17. S

    just found woodworm, is it expensive to treat?

    Thanks for the advice fella's. I've bought some relatively cheap stuff to spray on the infected wood - looking at the advice from Davey P I don't really need to worry and get the big companies in to sort it all out. Hell, if the stairs crumble away I'll just have to get some new ones!
  18. S

    just found woodworm, is it expensive to treat?

    Hi folks, I have just had a bit of building work done in my house and they have found some wood worm, mainly under the stairs. We bought the house about a year ago and had a detailed survey which I thought would have picked it up! Anyway, the workmen aren't sure if it's been treated or...
  19. S

    Waste pipe leak problem

    Nige, many thanks for the reply. Just to let you know I went to B&Q and bought some rubber bungs that attached to each waste pip and a thingg called a 'Waste Union'...it did the trick and all is working well - no leaks!!! Thanks
  20. S

    Waste pipe leak problem

    Hi Everyone, i'm new - nice to meet you all. I have recently installed a new dishwasher, The waste pipe was too short so I bought extra and attached it with a rubber bung that was already on the waste pipe attached to the dishwasher. The seal wasn't great and it has inevitably leaked....I...
Back
Top