Search results

Thanks for all the help spoke with regs and they say it all needs to come off and be done correctly! I will even try and get the SVP a little prettier noseall

Actually it doesn’t even cover the nails

Spoke with Marley they are saying 115mm Does this sound correct

Correct about the gauge they are 150mm thank you for pointing that out. Also top course needs doing is gap between eaves and first tile about 50mm covered up with lead. Also bottom row of tiles is only 3/4 tile as it has been cut they have recommended just to fill and use lead as tile is not...

Will measure when I’m back. Just one problem after another. If they are out of gauge would it fail building regs im guessing not.

You seem to have a real problem with the SVP! As the dormer has a new shower and toilet I’m afraid it has to be positioned how it is and have a few tenticles as you previously mentioned.

Are you talking about the flat tiles on the dormer? So they should be no more than 100mm and the top row is missing?

Thanks danfre that is due to be changed well spotted

Blimey I didn’t think it was that bad I have no idea what the gauge of tiles is other than they seem flatter to the left and leave a horrible gap to the gutter

Can anybody give me thoughts on this please am I just fussy? Tiles seem ok from right to left until we get to waste pipe and the kick horribly and also look terrible from garden. Any thoughts or ideas greatly appreciated

Thanks again for your time and help

I hadn’t even looked at the tiles at the upstand. Agree they don’t look great I’m hoping everything doesn’t need to come off to be done again but not looking brilliant!

New to the forum after some advice Would you be happy with the finish on this roof? Tiles don’t seem to fit correctly above the velux row 3 and a lot of the tiles don’t interlock as they should. Scared of water getting under tiles and wind blowing them off. Thanks in advance Also neighbour...