Search results

Thanks for the reply flameport. Just seems a waste as the output is already there (i think). Lucky it's only about 50quid for a new meter - a lot cheaper than some of the coin meters I have bought in the past.

http://www.stephenpwales.co.uk/Product/single_phase/home_single%20phase.htm look at the second one. it has pulse output for pc. Im sure the one I have at home does too as I see 2 grommets near the live wire. Look at the data sheet for that model, is that not where the pulse output is?

thanks for the reply bernardgreen Yes I think that is a good idea - I had this idea but did not want to go to the hassle of doing this if the meter already had a nice clean pulse out signal - also what stops people pulling the thing off the led window. I think I might have to use this idea...

Hi, At the moment I have an old mechanical pound coin meter that I use for secondary billing. It's limited as it can only hold about 7 days worth of electric (80kwh). I was going to buy a new secondary meter that had pulse output and rig it to an electronic coin meter that I would make...

MY GOD! thanks! I have just added one to the basket. I have only just seen your post 3months after you posted it - thank god they are still selling them. cheers misterhelpful - will let you if its good when it arrives.

also how long can I continuously paint with this machine before having to give it a rest? (duty cycle, do they call it?). This machine has no tank - it just constatly on when turned on.

Thank you merlin50 and monkeh, Just wanted to make sure - as it seemed too hot to me. I mean you cant leave your fingers on it that long till you think this is going to burn. This coiled hoses outer diameter is about 8mm and is plastic. I have a longer hose, its outer diameter is 16mm but...

I have a hobbyair 210 compressor and suction spray gun. I don’t have any instruction for the unit. I want to use it for painting some doors (house internal ones, not metal car doors.) I have filled the spray gun with plain water to check the spray, to see if everything is working - but...

Thanks very much for the links. I can't see any uk sites. But if they are costing 1000pounds or more they are too expensive. I was hoping for a mini version, light enough to carry, not more that 250ponds. I should have bought it in exchange mart all those years ago - can't remember the...

where can a get one of these I think I saw one years ago in machine mart, but it's not there anymore. Tried goggle - all I get is that picture. It's a telescopic expanding tool box. Need a small portable one. thanks. (looking at the above pic, I wonder if that model does...

Oh dear - don't tell me even the insulation is done wrong? Someone did mention ventilation. The guy said if you want me to install a roof tile vent he would, but he seemed to think it was not need. Has this guy done anything right? Which part are you not supposed fill? I think...

Years. May take 10years for the collapse to happen. When that happens we will need advice on putting a new roof up. I'll keep you informed. My mate is soldiering on with the plaster board without a care in the world.

YES. They cut them out before I could snap a pic

Rafters 2"X4" Purlins 2.5"X3.5"

The builder was told to convert the loft into a spare room that could be used occasionally. The builder should have advised my mate that he needs approval etc. Im not sure if every kind of loft conversion needs approval, but as the builder has cut purlins etc it should have been obvious to...

They are M10. And yes, what is the point? They are too close to the wall to be of any use I think. If they were attached closer to the middle the might have stopped the rafters sagging??