Search results

Thank you all working now

OK got as far as turning the zone of in prog 51 then pressed part, alarm set PIR was off on landing opened front door alarm went off no sound from bell box is that normal? internal sounder went off and the strobe on the bell box was flashing Thanks Ray

The PIR is zone 2 that I need to put in the settings then at night how do I set the alarm sorry for being so thick first time ive done this

Need a bit of help?. replace the control panel all went well did walk test all as should be strobe & sounders all good. The problem I have is trying to disable landing PIR a night tried part set suite think I must be doing wrong any help, please would be great. Ray

Mine as 2129 on the packaging no yellow stickers only reason asking the box panel came in was tatty looked old. I Will be replacing a 29-year-old Rascal+panel with the Texecom tomorrow DIY the first time for me fingers crossed. Thanks, Ray

Cheers for that any idea about the latest revision

what's the latest revision of the veritas 8 The one, I've just purchased is rev 5 firmware 3 22. Looking at installation Manuel it shows 5 replaceable fuses on mine only 1 fuse the rest are soldered to the PCB. Thanks, Ray.

Thank's Madrab Yes kept tightening to stop the leak yesterday but it got worse so did it just now all sorted now thank's.

Thanks, guys just watched a youtube video I have now drained the boiler turned all iso valves off and opened the white drain valve on the boiler not much water loss this is the washer that was leaking so I will replace with a fibre one. Thank's again

The copper end is like this I did change it about 12 month ago when I was changing a rad but I drained down the system. don't want to do that if I can get away just draining the boiler. I tried the iso valve but water still came out.

It's like this the copper 90-degree bend leaking on the brass nut that is screwed to the return iso valve on the right

So it's just the flow and return iso valves on the boiler off and that's it? Are they special washers or any rubber washer. Thank's Theweeknd

Need to replace the rubber washer where the filling loop connects the iso valve (can't stop it dripping )on the return side under the boiler. Can I do this by draining just the boiler or do I need to drain all the system down? (Baxi Duo-tech 28 HE A)