Search results

but would the wrong wattage bulb do that to a fitting No the guys are cooks that messed the other job up and all they did with these light was try to put new bulbs in them.

i don't have a problem with isolating ect and having a look for loose wires ect as quite a competent builder. but before i go messing with the wireing is it possible that they have put the wrong bulbs in and the unit can deal with them. The guys who messed with them originally aint got a...

The light fitting was originally fitted by an electrician and was checked at time of fitting to be working fine The picture light is linked to another picture light that is doing the same thing. Both sides of the light works fine with the opposite bulb removed sorry but i am not a...

I have recently tried to change the bulb in a halogen picture light. The light fitting holds 2 bulbs neither was working but when i removed 1 of the bulbs the other bulb came on. It seems with both fully functioning bulbs in the fitting nether bulb will light but as soon as i remove a bulb...

Concrete the thing in if your happy your never going to need to get to it but i personally would have fitted a slightly bigger pipe around it just below ffl incase it ever needed removing. Make sure you dont smash it with the poker when you pour that conny.

As a project manager of very large construction projects around the uk and working for 1 of the biggest construction companies in the world i can say that the number of women working as site managers in heavy construction has gone through the roof in the last 5 years or so to the point we now...

First of all can i say thanks to all who took the time to try and help me with this I thought i would come and post the resolution to my problem as i have been able to find this same problem all over the net and nobody has posted how they finally sorted the problem out so i thought i would...

to be honest i dont but had a so called specialist out today and he says it aint air and my pumps working fine so he suggests changing the controller. and to be honest i am fit to blow the whole thing up

I have a pumped 1.5 bar shower systems with a Grohe 1000 stat shower bar but the thing seems to have gone tits up so i dont wanna pay a fortune replacing it so what would you guys say would be a good replacement. Steve

any ideas as to how i can get shut of the air in my up and over pumped shower supply without doing major works to the system as the pipework in the loft runs really flat to the joists so this maybe the problem area.

right fella the door to your units fixes to the dishwasher door so everything will look as it is now once replaced. dish washers come in all sorts of sizes but just measure the opening that you have and you should be able to find 1 to fit no problem

bump

I have checked both non return valves on the shower bar and both seem to be working fine as they both move quite freely. My brain tells me its the stat but the tech helpline was really quite sure it was not the shower at all. To me it can only be either air in the system or the stat but i...

If we move it to either really hot or totally cold the problems goes away and yes you heading towards stat in the shower control bar but Grohe say not for some reason

Barkie 1 Nope changing the shower head pattern makes no differance at all but what we have noticed is that the shower works fine until the hot water comes through then the problem starts picasso I have checked the manual for the istallation and it makes no mention of any air vents at all

Barkie1 i think your onto something m8 as yes it works if i fix the hose on but not the head and yes the height i hold it at makes a differance so what do you think it could be fella and how do i put it right. Hot water is T off main HW from cylinder also fitted same pump back and also had it...

the system has been working fine for 4 years like this and the water flow is great with or without pump on. I have checked the installation against pump manual info and its spot on with what they recommend.

This has worked for me in the past and worth a try Close the valves to all other rads except the rad you wanna clear the air from and the next 1 in line and the increased flow sometimes is able to push the air along. Hope this helps Steve

Ok i have posted this before but we are not getting any place so here goes again with more info as i have run out of ideas now. We have a stuart Turner showermate water pump (dual)that runs to a Grohe 1000 shower regulator. Recently we had pump problems and had to remove the pump and...

Thanks m8 for the reply and i will check out see what i can find. what do you mean by the flow switches being aligned ?? lets see If this jogs someones memory to a past problem. If i remove the outlet hose and head the thing works fine as when i remove the whole shower control the pressure...