Search results

It's probably the impeller. Too old and too rigid making temparture rise. This plus hot water will trigger the cut out on the rotor coil.

No doubt anymore. It always stops with hot water

I disconnected the flow senser on the hot pipe but that did not prevent the issue to occur again. It responded quickly to the hot water. What could cause hot water to stop the pump?

*** deleted ****

No motor does not get hot; I did one more test and everything seems fine when running cold water only. It seems unlikely that the hot water cause an issue at the pump level. Perhaps it triggers something on the controller.

Controller seem to be working fine. When I open the bottom of the pump, remove and put back the impeller, it seems to improve the next run. When it runs it will go at full speed with a dynamic sound then it will make a different sound like it is struggling to keep runnning and then it will...

The pump itself seems to be working fine. I cleaned the copper pipe on the right hand side. Nothing stuck. I couldn't remove the waste but the water is flowing.

Ok impeller was not that clean. I was able to remove it and I washed it. The sound is better. PXL_20201005_205611913 by Popopo posted 5 Oct 2020 at 10:15 PM The white thing on the side is just a pipe. PXL_20201005_205615517 by Popopo posted 5 Oct 2020 at 10:15 PM PXL_20201005_205349619 by...

Impeller looks clean and is in one piece. are you talking about the white part with the important sticker or the larger and taller white part on the left? yes there are two flow sensors connected to the control box

Thank you. I unscrewed the bottom but it looks fine, doesn't it? Screenshot 2020-10-05 202843 by Popopo posted 5 Oct 2020 at 8:33 PM Overall installation look like this: PXL_20201005_191839897 by Popopo posted 5 Oct 2020 at 8:33 PM When putting back the cover at the bottom I am not sure if I...

In the wall, I can access the pump but I do not understand what is the cover that can be cleaned.

Hi I purchased a house with this pump already installed. It does not work properly. When I open the shower, it will work for some time (2 to 15 minutes, random) then stop and water will accumulate. I tried to unscrew the shower waste to clean a little but this did not help. My only solution is...