Search results

  1. Unknown321

    Shower head holder bracket extension ?

    Do they work with immersion heaters? The one on amazon is 10cm, cant find one thats 20+cm anywhere, suprrised they've not been made for my reason I'm sure many have the same issue
  2. Unknown321

    Shower head holder bracket extension ?

    Cant find one on there
  3. Unknown321

    Shower head holder bracket extension ?

    Hi I am looking for a shower bracket arm that extends to about 20cm - 25cm anyone have any ideas? Something like this, my hot water pressure isn't great so it falls close to the wall, i believe this will fix my issue... I cant seem to find any that are 20cm+ only 10cm, it would be better then...
  4. Unknown321

    Immersion boiler and fitting a shower

    Ive put 2 shower curtians either side, but the wall where the shower bracket/head is connected to is exposed, the hot water isn't as strong.. so it falls closer to the wall/taps. Is there any extension where I can extend the shower head at least 20cm so it moves further into the bathtub that...
  5. Unknown321

    Immersion boiler and fitting a shower

    I dont know if I can get the same tiles
  6. Unknown321

    Immersion boiler and fitting a shower

    Ok so I got one them croyex shower plugins that go on the taps. The hot shower works at my height lol 1 issue, I need to find a way to protect blasterboard wall from the shower... The titles aren't high enough... any suggestions?
  7. Unknown321

    Immersion boiler and fitting a shower

    Ill be asking the landlord Wednesday...
  8. Unknown321

    Immersion boiler and fitting a shower

    Ok thanks Now i just need to undo the bath tub with 20 screws on each 6 planks -.- then I'll find out if i can turn the water off under.. If not would be the stopclock outside?
  9. Unknown321

    Immersion boiler and fitting a shower

    So you think I will only get cold water pressure? but may get hot water if I lowered the shower head? that one I linked on ebay has a second shower head too which I could use sometimes in the bath?
  10. Unknown321

    Immersion boiler and fitting a shower

    Its an old house that converted to 4 flats with the basement
  11. Unknown321

    Immersion boiler and fitting a shower

    I cant find one inside, these 3 levers near the boilers, and 1 of them turns the hot off. I can turn both kitchen taps off from under the sink...
  12. Unknown321

    Immersion boiler and fitting a shower

    Something like this https://www.ebay.co.uk/itm/285313625059?siteid= I assume the water is coming from the mains? I dont know where else it could come from, its not possible from upstairs flat? I live on a 1st floor
  13. Unknown321

    Immersion boiler and fitting a shower

    Will I not get any cold water either?
  14. Unknown321

    Immersion boiler and fitting a shower

    its roughly 215cm from the bathroom floor to where I would like the shower head as im 6ft 3.. the bottom of the boiler sits roughly 180cm above from the floor and its highest point is roughly 280cm
  15. Unknown321

    Immersion boiler and fitting a shower

    Quote These another flat behind me, so I think water froms the mains outside? My cold tap as they are now bathrooms and kitchen, water pressure is stronger than the hot
  16. Unknown321

    Immersion boiler and fitting a shower

    Hi I have an immersion boiler and I'm looking to put a shower head in my flat, so my boiler is about 1.5m higher than my bath taps If i add a shower and have the extension pole/ shower head about the same height as the boiler, would I get any hot and cold water? I mainly want a shower for cold...
Back
Top