Search results

  1. B

    Megaflow not enough hot water

    Also how do I go about recharging the bubble anyway many thanks Ian.
  2. B

    Megaflow not enough hot water

    I timed how long to fill 5 liters and then how long until water went cold and had 110 liters of hot water from the megaflow and it says on the tank 200 liters the reason it came to light we used to be able to get about 20 mins of shower time now we only get about 10 - 12 mins and then cold water...
  3. B

    Megaflow not enough hot water

    I have a megaflow thats suppose to create 200 liters of hot water but i only get 110 liters from it before it goes cold would this be because the air bubble needs resetting cheers Ian.
  4. B

    Whirlpool ADG 734 Dishwasher

    I still suspect that it could be that thermostat as I have today out it back in run the machine until it reached the point where it sticks the pipe that the thermostat is connected to got very hot and it was still showing open circuit I slip and shorted across the terminals and the machine...
  5. B

    Whirlpool ADG 734 Dishwasher

    Ok seams you where right sleepyhead no suprise there I have heated the thermostat up and it went from open to closing as it got hot. There is only one stat on the underside of the machine with two white wires going to it, there is a silver disc inserted in a black rubber pipe and then a white...
  6. B

    Whirlpool ADG 734 Dishwasher

    Thanks for the reply sleepyhead I am assuming that the thermostat that you are on about is a small white cylinder about 12-15mm tall with two contacts on it I have that off now and the multimeter set on ohms say open circuit so I am assuming your best guess was spot on any ideas on the best...
  7. B

    Whirlpool ADG 734 Dishwasher

    Bump just moving this to the top in the hopes that the guru of whirlpool dishwashers Sleepyhead see this and has some divine inspiration and comes up with a sloution I live in hope many thanks Ian. 8)
  8. B

    Whirlpool ADG 734 Dishwasher

    I have the above dishwasher thats not going through a complete cycle it starts gets hot takes the tablet then seams to get stuck and continues to wash at the same place about half way through. It also after a whiles trips the thermal cut out on the heating element I assume because it's not...
  9. B

    Whirlpool ADG 734 Dishwasher

    Problem found after much research on this site similar problem on another machine gave me the answer when the element went down it must have tripped the overheat stat just needed resetting and away it went must say thanks to all on this site for the info cheers Bonesy :lol:
  10. B

    Whirlpool ADG 734 Dishwasher

    Hi I have the above dishwasher thats faulty it will not complete a wash cycle at first because the water is not getting hot I thought that the element had gone and as the water did not reach the desired temperature the machine would not complete the cycle, but I have changed the element and it...
Back
Top