Search results

  1. R

    Curtain poles pulled out from wall, large holes.

    ... It must be only 10-15cm from plasterboard to masonry. I have drilled into brick work but still won't hold. What is a spacer?? sorry not heard or seen these.
  2. R

    Triton Topaz ti100 low pressure fault

    So far so good. Shower seems to have better pressure and has not had some fault since I cleaned it out.
  3. R

    Creating new loft hatch.

    So after some further reading I've found a pre-fabricated loft hatch with ladders. KYL07 which requires an opening 700 x 1000. So I would need to cut one of the loft floor joists and create a new support using 2 new timber joists. I've read I need to use 2 new timber joists which are the same...
  4. R

    Triton Topaz ti100 low pressure fault

    I never cleaned it but had to disconnect it to clean the filter. To clean this do I just removed thd pipe and run water through it?
  5. R

    Creating new loft hatch.

    Hi. So we are moving house soon and the existing loft hatch is situated in the room our son will occupy. It is a standard hatch. I'm wanting to create a new latch in our room and make it larger with an option to fit a ladder later. I've measured to joists in the loft and they as follows...
  6. R

    Triton Topaz ti100 low pressure fault

    So I isolated the mains water. Cleaned out the shower including the inlet filter and put all back together. Pressure seems stronger now so maybe I've opened the mains up a bit. Will see what happens now.
  7. R

    Triton Topaz ti100 low pressure fault

    ... will give this a go. I will assume it's best to isolate power and turn off mains water before doing any work on the shower?
  8. R

    Triton Topaz ti100 low pressure fault

    ..... It seems to be random but I use the shower before going to work around 5:30am and sometimes it will LP fault 2 or 3 times before working. Other times its used is around 7-8 pm and will LP fault a few times.
  9. R

    Curtain poles pulled out from wall, large holes.

    Hi. So as stated the curtain poles I had installed have but pulled from the wall. I've already tried a repair by screwing wood onto wallmart but even that has been damaged so now I'm left with larger holes.
  10. R

    Triton Topaz ti100 low pressure fault

    I have a Triton Topaz T100si and has an intermittent low pressure fault the solenoid reads 3.78 ohms. Sometimes the LP fault is random other times its when the sink cold tap is turned on full? Any ideas?
  11. R

    Hanging a punch bag in my shed (apex roof)

    Hi, My son is wanting a punch bag, he doesn't have the space in his bedroom but I have a 12ft x 10ft garden shed with an apex roof and was wondering if its possible to hang a punch bag from the roof if I used some sort of extra support? Thanks
  12. R

    Replace window but surrounding brickwork and mortar is damag

    So i should make the surround good using either hardwall or foam. They remove the old window and replace it with a new one. When installing the window do I use cleats or do I just secure it with screws through the window frame? Cheers
  13. R

    Replace window but surrounding brickwork and mortar is damag

    Thanks for taking the time to look and respond. Here are the external pictures. I'm not sure what kind of window was originally in, these windows were in when we moved in 8 years ago. It was all wood architraves that I removed to expose this. which then exposed lots of...
  14. Untitled

    Untitled

  15. Untitled

    Untitled

  16. Untitled

    Untitled

  17. Untitled

    Untitled

  18. Untitled

    Untitled

Back
Top