Search results

No, not quite. It removes the 15 second delay for anything beneath the start entry chosen so multiple options trigger at once. The stop also still has its place. You could start and stop at 1 and all you would get is keypads and internal sounders.

Responding to this during a period of random insomnia so others may be able to contribute a way around what your trying to do, but, what your trying to do isn’t possible through the alarm response settings. Let me explain why. Alarm response works on a hierarchal stepped escalation every...

Sounds like you need another installer/engineer that knows what they are doing

Fuse or battery fault that needs checked

If you got a couple of fobs you don’t need to use the station

Makes no difference but why not just get a couple of wireless fobs.

Just change the requisite Area ? Exits to 0 within the volume control section of the engineering menu.

You must have altered something else somewhere. If you’re referring to them as a customer hopefully you’ve got a few panels, experience etc. Save yourself some hassle and just clean start the panel.

What do you mean you have the zone set as final exit? Do you mean the door contact? Timed should be working fine. Are you sure they are setting Area B? Try changing it to final exit / timed just to see if it works then? Presumably for Area B exit you have a timer setup?

Turn on a walk test either from the user or engineering menu. When you walk past the input in question it will clear from the screen. To be honest though unless you’re in a mansion with 100 sensors just change the batteries in them all…. Buttons in the grand scheme of things vs how...

Do a walk test. Poor install when inputs haven’t been named correctly.

Basically yes

You might be fine but you may also end up with an error on the panel that you can’t clear if the tamper goes off. There’s no way of knowing if this will happen up front and like I say, unlikely the panel would have been setup in this way - but not impossible.

Is it a wireless delta bell and do you have the engineering code?

Accessing the engineering menu then exiting out should reset it until the next set interval. Are you sure it was the engineering menu you accessed?

Within the diagnostics menu, you can check all wireless devices including learned inputs and the bell boxes

You can run battery tests within the engineering menu. I wouldn’t be replacing batteries internal or external each year - that’s just a waste.

Tapo / TPLink

Andy drop me a PM and I’ll sort you out with app only access if you want.

Can you try and set area b from the panel and once it’s set see if your tag will unset it when presented at the panel, not the tag reader