Search results

It will be ok. Just needs to be thicker on the pin holes. It’s because you can’t prime it properly when doing the 1st coat.

Wouldn’t go with that underlay. I’d use Treadaire Ambiance or Chromium both 9mm and high quality.

fitting planks towards the patio doors

Be fine grinding it or sanding it if the primer was done correct.

We keep it in the shade , black out the windows and never had a problem. Most of the time we fit LVT so can’t have direct sunlight on it while fitting it.

I’d be putting another coat over that floor. What you laying over it ?

No it doesn’t as that weakens it and you get a soft finish. Most bags will have a the max and min of water to go on. 4.5ltr - 4.75ltr. Never go above that.

Should have used primer. Should have mixed it quickly. Someone mix and keep them coming and one putting it down. Never heard of that compound so can’t comment if it’s any good. The best wet edge compound is ardex k40 flow

It’s asphalt. Dave has said the solution.

Will be ok with carpet as that lets the floor breathe abit.

Get a Incizo quickstep trim

You have no signs of damp as your sub floor is breathing.

Why not use a LVT click ?

It prob won’t have one and even if it did it would be perished now. So yes a Dpm sandwich will sort it out. Give the floor a scape with a blade scraper 1st. Then na straight to it.

For me all we use is sp101 if going over with adhesive or a screeding compound EN 314-2 class 3 Exterior.

Primer is ok. Might need to dilute it. Can go over after 24 hours.

Maybe use Mapei renovation then. Do you have a mercardos anywhere close. More choice.

Is it amtico signature , form , Spacia or first ? Does the sub floor have an existing Dpm under it ?

Mercado I’m Aintree sell it and you could get in on my account if that’s closer.

Where are you on Merseyside mate. I’m in Moreton if you need anything.